Buy 531AS104-1 Spring Helical Tors part by Aeroparts Company Inc

Part Number: 531AS104-1

Alternate P/N: 531AS1041

Manufacturer: aeroparts company inc

NSN: 5360-00-019-6857

NIIN: 000196857

Item Name : spring helical tors

CAGE Code: 0A489

FSC: 5360 Coil Flat Leaf and Wire Springs

INC Code: 04228

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 531AS104-1 (described as Spring Helical Tors), manufactured by Aeroparts Company Inc with CAGE code 0A489. This part is registered under NSN 5360-00-019-6857, classified in FSG 53 Hardware and Abrasives / FSC 5360 Coil Flat Leaf and Wire Springs. Our verification process will confirm traceability through supporting identifiers including NIIN 00-019-6857, NCB code 00 (origin: USA), and INC 04228. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 531AS104-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 531AS104-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 531AS104-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 531AS104-1 with NSN 5360-00-019-6857, 5360000196857

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5360-00-019-6857 Item PartTypeName: SPRING,HELICAL,TORSION	5360	000196857	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
531AS104-1	6	2	3

Characteristics Data of NSN 5360-00-019-6857, 5360000196857

MRC	Criteria	Characteristic
AARX	INSIDE DIAMETER	0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
ABQK	END STYLE	OFFSET HALF LOOP,LEFT END SECOND END
ABQK	END STYLE	REDUCED LOOP END FIRST END
AGEK	SPRING FREE LENGTH	0.812 INCHES NOMINAL
AHQA	CENTER SECTION WIDTH	0.562 INCHES NOMINAL
APCN	COIL QUANTITY	2-1/2
AXLQ	SPRING FREE OUTSIDE DIAMETER	1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
AXLY	CENTER LOOP RADIUS	0.156 INCHES NOMINAL
AXMC	HOOK RADIUS	0.250 INCHES NOMINAL BOTH ENDS
AXMC	HOOK RADIUS	0.281 INCHES NOMINAL FIRST END
AXMH	END ANGULAR RELATIONSHIP	END W/LH HELIX OF COIL ANGLED TO CENTER SECTION AND END W/RH HELIX OF COIL ANGLED TO CENTER SECTION
CXTP	END LENGTH FROM SECOND BEND TO THIRD BEND OR END	0.375 INCHES NOMINAL SECOND END
CXTP	END LENGTH FROM SECOND BEND TO THIRD BEND OR END	0.531 INCHES NOMINAL FIRST END
STYL	STYLE DESIGNATOR	SINGLE TORSION RIGHT HAND

Identification

CRITL	The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9---n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	178040 - Springs torsion
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	579 - Steel springs, (less than 35 feet)