Buy MS25038-4 Generator Tachometer part by Aircraft Appliances And Equipment

Part Number: MS25038-4

Alternate P/N: MS250384

Manufacturer: aircraft appliances and equipment

NSN: 6680-00-553-8892

NIIN: 005538892

Item Name : generator tachometer

CAGE Code: 35076

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

INC Code: 20241

Country: USA

NCB Code: 00

FSG: 66 Instruments And Laboratory Equipment

We've received your request for MS25038-4 (described as Generator Tachometer), manufactured by Aircraft Appliances And Equipment with CAGE code 35076. This part is registered under NSN 6680-00-553-8892, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-553-8892, NCB code 00 (origin: USA), and INC 20241. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS25038-4 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS25038-4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS25038-4, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6680-00-553-8892, 6680005538892

MRC	Criteria	Characteristic
AXGY	Mounting Method	PAD
ABWV	Shaft Diameter	0.310 INCHES MINIMUM SINGLE END AND 0.312 INCHES MAXIMUM SINGLE END
BKPC	Calibration Voltage Output Type In Volts	21.0 AC
MRC	Decoded Requirement	Clear Text Reply
BFLQ	Calibration Speed In Rpm	4200
CBBL	Features Provided	HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
TEST	Test Data Document	81349-MIL-G-9398 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CWCS	Length Of Shaft From Housing	0.467 INCHES SINGLE END
AXHR	Mounting Facility Type And Quantity	4 UNTHREADED HOLE
AKCT	Shaft Rotation Direction	CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END
CWGD	Nominal Center To Center Distance Between Mounting Facilities Parallel To Height	1.876 INCHES
CWFX	Rotor Speed Rating In Rpm	5500.0 SINGLE FULL LOAD
CWFY	Nominal Center To Center Distance Between Mounting Facilities Parallel To Width	1.876 INCHES
TTQY	Terminal Type And Quantity	1 CONNECTOR, PLUG
ABXQ	Flatted Portion Length	0.431 INCHES MINIMUM SINGLE END AND 0.503 INCHES MAXIMUM SINGLE END
AAJU	Overall Length	4.312 INCHES
ASDB	Width Across Flats	0.243 INCHES MINIMUM SINGLE END AND 0.245 INCHES MAXIMUM SINGLE END
CWHZ	Shaft End Characteristic	A15 SINGLE STYLE SINGLE END

Schedule B & Trade

End Use : 30230	Other parts and accessories of vehicles
Schedule B : 9029205000 (NAICS 334514)	Speedometers and tachometers, not for use in civil aircraft
SITC : 87325	Speedometers and tachometers; stroboscopes

Identification

CRITL	The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	-------
Quantity per pack	1
Repariability	If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	590 - Generators and parts, (machinery and parts),(less than 35 feet)