Buy 0E2065 Bracket Double Angl part by Allis Chalmers Corp

Part Number:  0E2065
Manufacturer:  allis chalmers corp
NIIN:  005347906
Item Name :  bracket double angl
CAGE Code:  92392
INC Code:  20354
Country:  USA
NCB Code:  00

We've received your request for 0E2065 (described as Bracket Double Angl), manufactured by Allis Chalmers Corp with CAGE code 92392. This part is registered under NSN 5340-00-534-7906, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-534-7906, NCB code 00 (origin: USA), and INC 20354. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 0E2065 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 0E2065

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 0E2065, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 0E2065 with NSN 5340-00-534-7906, 5340005347906

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-00-534-7906

Item PartTypeName:

BRACKET,DOUBLE ANGLE

5340005347906P
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
0E2065695

Characteristics Data of NSN 5340-00-534-7906, 5340005347906

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH0.781 INCHES NOMINAL
ADLLSECOND LEG LENGTH1.843 INCHES NOMINAL
AHLKFIRST LEG HOLE DIAMETER0.437 INCHES NOMINAL
AHLNSECOND LEG HOLE DIAMETER0.437 INCHES NOMINAL
AHPWFIRST LEG THICKNESS0.104 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.104 INCHES NOMINAL
AHPZCENTER SECTION HEIGHT0.537 INCHES NOMINAL
AHQACENTER SECTION WIDTH0.750 INCHES NOMINAL
AHQBCENTER SECTION THICKNESS0.104 INCHES NOMINAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
CSSRSECOND LEG ANGLE90.0 DEGREES NOMINAL
MATTMATERIALSTEEL
STYLSTYLE DESIGNATORDOUBLE ANGLE

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: Q - 70.0
LTL: Q - 70.0
NMFC: 095190 - Hardware, noi sub 9
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 713 - Metal hardware

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top