We've received your request for 663636 (described as Motor Windshield Wi), manufactured by Am General Llc with CAGE code 34623. This part is registered under NSN 2540-00-391-4329, classified in FSG 25 Vehicular Equipment Components / FSC 2540 Vehicular Furniture and Accessories. Our verification process will confirm traceability through supporting identifiers including NIIN 00-391-4329, NCB code 00 (origin: USA), and INC 15773. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 663636 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2540-00-391-4329 Item PartTypeName: MOTOR,WINDSHIELD WIPER,VACUUM | 2540 | 003914329 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 63527 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHE | OUTSIDE DIAMETER | 0.250 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AGVN | SHAFT THREAD SIZE | 0.190-32 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND |
| AKAL | SHAFT SCREW THREAD LENGTH | 0.188 INCHES NOMINAL |
| ALXY | MOUNTING HOLE SPACING | 4.688 IN. C TO C |
| APGF | DESIGN TYPE | OSCILLATING ARM |
| APHP | MANUAL OPERATION FACILITY | NOT PROVIDED |
| AQPN | MOUNTING HOLE THREAD SIZE | 0.190-32 |
| AXGY | MOUNTING METHOD | BRACKET |
| BHMQ | CONTROL VALVE | NOT PROVIDED |
| BJYB | THROW ANGLE IN DEG | 117.0 |
| BJYC | CONNECTION FITTING | INCLUDED |
| BJYD | ACTUATING SHAFT LENGTH | 1.609 INCHES NOMINAL |
| BJYF | ACTUATING SHAFT LARGEST DIAMETER | 0.250 INCHES NOMINAL |
| BJYG | ACTUATING SHAFT END CONNECTION TYPE | THREADED |
| BJYJ | MOUNTING HOLE THREAD PROVISION | THREADED |
| BJYK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 8512908000 (NAICS 336320) | Windshield wiper parts, defroster parts & demisterparts for vehicles |
| SITC : 77835 | Parts of electrical lighting and signaling equipment (excluding filament, discharge or arc lamps); parts of windshield wipers, defrosters or demisters |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | * special requirements. |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | M - 85.0 |
| NMFC: | 197720 - Windshield wiper arms blades/mtrs |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 586 - Vehicle parts, other than automobile |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
