We've received your request for ASTM F104-03 (described as Cork Sheet), manufactured by American Society For Testing with CAGE code 81346. This part is registered under NSN 5330-00-223-2657, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-223-2657, NCB code 00 (origin: USA), and INC 03823. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your ASTM F104-03 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-223-2657 Item PartTypeName: CORK SHEET | 5330 | 002232657 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ASTM F104-03 | 6 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASH | MINIMUM TENSILE STRENGTH | 175 POUNDS PER SQUARE INCH |
| ABGL | WIDTH | 18.000 INCHES NOMINAL |
| ABNM | THICKNESS | 0.062 INCHES NOMINAL |
| ABRY | LENGTH | 72.000 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | CORK AND RESIN MIL-G-12803,NO. F213000M2R |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2,2116A TYPE |
| End Use : 12770 | Other industrial supplies |
|---|---|
| Schedule B : 4502000000 (NAICS 321999) | Natural cork, debacked or roughly squared, or rectangular (inc square) blocks, plates, sheets or strip (inc sharp-edged blanks for corks or stoppers) |
| SITC : 24402 | Cork, natural, debacked or roughly squared or in rectangular blocks, plates, sheets or strip (including sharp-edged blanks for corks and stoppers) |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | # packager options so lo |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Sh |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 053560 - Cork bars/rods/sheets/slabs s |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
