Buy 16MHR-16UMS-27.00 Hose Assembly Nonme part by Anchor Swan Corp

Part Number: 16MHR-16UMS-27.00

Alternate P/N: 16MHR16UMS27.00

Manufacturer: anchor swan corp

NSN: 4720-01-166-5362

NIIN: 011665362

Item Name : hose assembly nonme

CAGE Code: 70434

FSC: 4720 Hose and Tubing Flexible

INC Code: 20311

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

We've received your request for 16MHR-16UMS-27.00 (described as Hose Assembly Nonme), manufactured by Anchor Swan Corp with CAGE code 70434. This part is registered under NSN 4720-01-166-5362, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 01-166-5362, NCB code 01 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 16MHR-16UMS-27.00 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 16MHR-16UMS-27.00

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 16MHR-16UMS-27.00, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 4720-01-166-5362, 4720011665362

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKV	OUTSIDE DIAMETER	1.500 INCHES NOMINAL
ACKH	MINIMUM INSIDE BENDING RADIUS	3.000 INCHES
AWLS	CONNECTION TYPE	THREADED EXTERNAL PIPE 1ST END
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED RAYON CORD AND 2ND LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CQGM	MAXIMUM OPERATING PRESSURE	1250.0 POUNDS PER SQUARE INCH
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
CRWL	INSIDE SURFACE CONDITION	SMOOTH
MEDA	MEDIA FOR WHICH DESIGNED	HYDRAULIC FLUID SINGLE RESPONSE
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END
AARX	INSIDE DIAMETER	1.000 INCHES NOMINAL
AHNC	CONNECTION STYLE	PLAIN 1ST END
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END
CQBD	BURST TEST PRESSURE	5000.0 POUNDS PER SQUARE INCH
CQJX	NOMINAL THREAD SIZE	1.000 INCHES 1ST END
CRXX	MEASURING METHOD AND LENGTH	27.000 INCHES NOMINAL OVERALL
THSD	THREAD SERIES DESIGNATOR	NPTF 1ST END

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown