Buy 11CT101C1-5 Synchro Control Tra part by Api Harowe Inc

Part Number: 11CT101C1-5

Alternate P/N: 11CT101C15

Manufacturer: api harowe inc

NSN: 5990-00-959-2373

NIIN: 009592373

Item Name : synchro control tra

CAGE Code: 06989

FSC: 5990 Synchros and Resolvers

INC Code: 15289

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 11CT101C1-5 (described as Synchro Control Tra), manufactured by Api Harowe Inc with CAGE code 06989. This part is registered under NSN 5990-00-959-2373, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-959-2373, NCB code 00 (origin: USA), and INC 15289. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 11CT101C1-5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 11CT101C1-5

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 11CT101C1-5, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 11CT101C1-5 with NSN 5990-00-959-2373, 5990009592373

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-959-2373 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER	5990	009592373	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11CT101C1-5	C	2	5

Characteristics Data of NSN 5990-00-959-2373, 5990009592373

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,STAINLESS
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.1240 INCHES MINIMUM AND 2.1540 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.9750 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3620 INCHES MINIMUM AND 0.3860 INCHES MAXIMUM SINGLE SHAFT
AJSL	BODY SIZE	11
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	90.0 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	20.0 MILLIAMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	270.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJTG	ZRO IMPEDANCE MAGNITUDE IN OHMS	2672.00 MINIMUM AND 4008.00 MAXIMUM
AJTH	ZRO IMPEDANCE ANGLE IN DEG	63.36 MINIMUM AND 95.04 MAXIMUM
AJTJ	ZSO IMPEDANCE MAGNITUDE IN OHMS	4376.00 MINIMUM AND 6564.00 MAXIMUM
AJTK	ZSO IMPEDANCE ANGLE IN DEG	64.64 MINIMUM AND 96.96 MAXIMUM
AJTS	ROTOR DC RESISTANCE IN OHMS	308.00 MINIMUM AND 452.00 MAXIMUM
AJTT	STATOR DC RESISTANCE IN OHMS	444.00 MINIMUM AND 666.00 MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	5.000 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	60.00 OUTPUT
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	100.00
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-5.0 TO 5.0
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	16.0 CENTIMETER-GRAMS NOMINAL
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	4.0 CENTIMETER-GRAMS NOMINAL
AJWQ	PILOT LENGTH	0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7620 INCHES MINIMUM AND 1.7680 INCHES MAXIMUM
CQTM	TERMINAL LOCATION	REAR
CQZS	SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.0250 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.698 ROTOR TO STATOR MINIMUM AND 0.772 ROTOR TO STATOR MAXIMUM
TTQY	TERMINAL TYPE AND QUANTITY	5 WIRE LEAD

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)