Buy PLT5470 10 13 Rivet Blind part by Arconic Global Fasteners And Rings

Part Number: PLT5470 10 13

Manufacturer: arconic global fasteners and rings

NSN: 5320-01-580-0337

NIIN: 015800337

Item Name : rivet blind

CAGE Code: 5M902

FSC: 5320 Rivets

INC Code: 00864

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for PLT5470 10 13 (described as Rivet Blind), manufactured by Arconic Global Fasteners And Rings with CAGE code 5M902. This part is registered under NSN 5320-01-580-0337, classified in FSG 53 Hardware and Abrasives / FSC 5320 Rivets. Our verification process will confirm traceability through supporting identifiers including NIIN 01-580-0337, NCB code 01 (origin: USA), and INC 00864. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your PLT5470 10 13 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PLT5470 10 13

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part PLT5470 10 13, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number PLT5470 10 13 with NSN 5320-01-580-0337, 5320015800337

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-01-580-0337 Item PartTypeName: RIVET,BLIND	5320	015800337	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
PLT1058-10-13	5	9	5

Characteristics Data of NSN 5320-01-580-0337, 5320015800337

MRC	Criteria	Characteristic
ABAJ	LUBRICATION	DRY FILM OR PARAFFIN WAX OR CETYL ALCOHOL
MATT	MATERIAL	TITANIUM ALLOY UNS R56400 BOLT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 OR AMS 4967, 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE BOLT
CQBC	MINIMUM TENSILE STRENGTH	3250 POUNDS PER SQUARE INCH
AAZE	SHANK DIAMETER	0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
AAZG	HEAD MAJOR DIAMETER	0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
ANEE	GRIP LENGTH	0.782 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
AASK	HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SR-1	MFR SOURCE CONTROLLING REFERENCE	ST3M781-5-13
ABAF	EXPANSION DEVICE	THREADED SLEEVE
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
SR-1	SPEC/STD CONTROLLING DATA
AGAV	END ITEM IDENTIFICATION	F/A-18 E/F/G
AAZF	SHANK STYLE	THREADED SELF-PLUGGING SHANK W/SLEEVE
SR-1	MANUFACTURERS CODE	76301

Schedule B & Trade

End Use : 12290	Nonferrous metals, other
Schedule B : 8108908000 (NAICS 331491)	Other wrought titanium, nesoi
SITC : 69985	Titanium, wrought, and articles of titanium, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	1rqe00-
Quantity per pack	1
Repariability	Medium demand velocity items (consumables)
Shelf Life	N/A
SOS	Nrp
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	U - 50.0
NMFC:	106510 - Rivets i/s plain/galvanized etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware