Buy DIN 16554 Refill Ballpoint part by Aristo Graphics Systems Inc

Part Number: DIN 16554

Manufacturer: aristo graphics systems inc

NSN: 7510-01-203-9892

NIIN: 012039892

Item Name : refill ballpoint

CAGE Code: 52488

FSC: 7510 Office Supplies

INC Code: 77777

Country: USA

NCB Code: 01

FSG: 75 Office Supplies and Devices

We've received your request for DIN 16554 (described as Refill Ballpoint), manufactured by Aristo Graphics Systems Inc with CAGE code 52488. This part is registered under NSN 7510-01-203-9892, classified in FSG 75 Office Supplies and Devices / FSC 7510 Office Supplies. Our verification process will confirm traceability through supporting identifiers including NIIN 01-203-9892, NCB code 01 (origin: USA), and INC 77777. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DIN 16554 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DIN 16554

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part DIN 16554, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DIN 16554 with NSN 7510-01-203-9892, 7510012039892

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
7510-01-203-9892 Item PartTypeName: REFILL,BALLPOINT	7510	012039892		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
DIN 16554	5	2	3

Identification

HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Y
Classification Control	U
MGMT_CTL	E2200x-
Quantity per pack	No qup
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Gsa
Unit of Measure	Ea

Freight Information

ACC:	S - Office and school supplies and equipment including office machines, furniture and stationary.
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	M - 85.0
LTL:	K - 92.5
NMFC:	179060 - Markers noi/pens ink sub1
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	730 - Stationery