We've received your request for 11652726 (described as Clamp Block Section), manufactured by Army United States Department Of The with CAGE code 19204. This part is registered under NSN 5340-01-070-3226, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-070-3226, NCB code 01 (origin: USA), and INC 39404. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 11652726 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-070-3226 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 010703226 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11652726 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 6.960 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.750 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 1 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.380 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | M109 HOWITZER FAMILY |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 2.380 INCHES NOMINAL |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 5.317 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 1.740 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 1 |
| CWWM | CLAMPING HOLE DIAMETER | 2.000 INCHES NOMINAL ALL HOLES |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.280 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 5.500 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,225/8,200/8;T6 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ENAMEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | M - 85.0 |
| NMFC: | 146150 - Gun carraige/gun mount parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
