Buy 2805514P5 Relay Electromagnet part by Artisan Controls Corporation

Part Number:  2805514P5
NIIN:  011160861
Item Name :  relay electromagnet
CAGE Code:  0AGK2
INC Code:  32512
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 2805514P5 (described as Relay Electromagnet), manufactured by Artisan Controls Corporation with CAGE code 0AGK2. This part is registered under NSN 5945-01-116-0861, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 01-116-0861, NCB code 01 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2805514P5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2805514P5

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 2805514P5, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 2805514P5 with NSN 5945-01-116-0861, 5945011160861

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-116-0861

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450111608610N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
2805514P5223

Characteristics Data of NSN 5945-01-116-0861, 5945011160861

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.812 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKWOVERALL HEIGHT5.438 INCHES MAXIMUM
ABMKOVERALL WIDTH1.520 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONDUSTPROOF
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM SINGLE MOUNTING FACILITY
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY
AKDXWINDING QUANTITY1
APCNCOIL QUANTITY1
APNAWINDING DC RESISTANCE RATING450.0 OHMS NOMINAL SINGLE WINDING
APNPDUTY TYPECONTINUOUS
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE SINGLE MOUNTING FACILITY
CQYJMOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT4 POLE,DOUBLE THROW,ONE POSITION MOMENTARY
CRXHTIME DELAY0.03 SECONDS MAXIMUM FIXED RELEASE TIME
CRXHTIME DELAY0.10 SECONDS NOMINAL FIXED OPERATE TIME
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP50.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE5.0 AMPERES DC AND 1.0 AMPERES DC RESISTIVE LOAD
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS240.0 AC AND 110.0 DC
TTQYTERMINAL TYPE AND QUANTITY14 WIRE HOOK ALL FUNCTIONS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536490050 (NAICS 335314) Relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
SITC : 77254 Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top