Buy ANURM70 Generator Signal part by Automated Industrial Electronics Corp

Part Number:  ANURM70
NIIN:  005192104
Item Name :  generator signal
CAGE Code:  57646
INC Code:  03901
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for ANURM70 (described as Generator Signal), manufactured by Automated Industrial Electronics Corp with CAGE code 57646. This part is registered under NSN 6625-00-519-2104, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-519-2104, NCB code 00 (origin: USA), and INC 03901. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your ANURM70 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ANURM70

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part ANURM70, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-519-2104, 6625005192104

MRCCriteriaCharacteristic
AFGQFREQUENCY RANGE RATING50.000 TO 400.000 MEGAHERTZ
AFHSACCESSORY COMPONENT QUANTITY1 AND 1 AND 2 AND 1 AND 1 AND 1 AND 1 AND 1
ANLCFREQUENCY BAND QUANTITY3
ABKWOVERALL HEIGHT18.500 INCHES NOMINAL
FAAZPHASESINGLE
BHFZCALIBRATED SIGNAL OUTPUT RANGE0.1 TO 100,000 MC CALIBRATED OUTPUT
SR-5DESIGN CONTROL REFERENCEANURM70
AMNEOUTPUT IMPEDANCE RATING50.0 OHMS NOMINAL
AYYEMODULATION TYPEFM
SR-5THE MANUFACTURERS DATA
AMSEVOLTAGE RATING115.0 VOLTS NOMINAL
ADTVCASE MATERIALALUMINUM
BDHWCALIBRATION ACCURACY RATINGPORM 1.0 PCT
ABMKOVERALL WIDTH14.938 INCHES NOMINAL
BHQGMODULATION DEGREE0.5 PERCENT NOMINAL
ABHPOVERALL LENGTH20.625 INCHES NOMINAL
AKVYACCESSORY CONTROLLING AGENCYJETDS;JETDS;JETDS;JETDS;JETDS;JETDS;MEASUREMENT CORP;MEASUREMENT CORP
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
AKVZACCESSORY IDENTIFYING NUMBERSG-3 TYPE NO. AND CY-1504/URM-70 TYPE NO. AND CG-718/U TYPE NO. AND UG-643/U TYPE NO. AND UG-564/U TYPE NO. AND UG637/U TYPE NO. AND H-4401 PART NO. AND 4400 PART NO.
AZCGACCESSORY COMPONENT NAMEGENERATOR,SIGNAL;CASE,SIGNAL GENERATOR;CABLE ASSY,RADIO FREQ;ADAPTER,CONNECTOR;ADAPTER,CONNECTOR;ADAPTER,CONNECTOR;ADAPTER;CONNECTOR
ADTYCASE SURFACE TREATMENTENAMELED
BHGDMODULATOR LOCATIONINTERNAL
BHGCSIGNAL OUTPUT CONSTANCYPORM 2.0 DB VARIATION THROUGHOUT FREQ RANGE
AAXXMOUNTING TYPEPORTABLE
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
BHQDMODULATED FREQUENCY RATING1.0 KILOHERTZ MINIMUM AND 1.6 KILOHERTZ MAXIMUM
SR-5MANUFACTURERS CODE80058
ACDCCURRENT TYPEAC

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8543200000 (NAICS 334515) Signal generators
SITC : 77878 Electrical machines and apparatus, having individual functions, n.E.S. (other than particle accelerators)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: W - Rating variable
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top