Buy GS1014V5 11A Screw Close Toleran part by B And B Specialties Inc

Part Number: GS1014V5 11A

Manufacturer: b and b specialties inc

NSN: 5305-01-477-5971

NIIN: 014775971

Item Name : screw close toleran

CAGE Code: 1EM77

FSC: 5305 Screws

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for GS1014V5 11A (described as Screw Close Toleran), manufactured by B And B Specialties Inc with CAGE code 1EM77. This part is registered under NSN 5305-01-477-5971, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 01-477-5971, NCB code 01 (origin: USA), and INC 29294. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your GS1014V5 11A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GS1014V5 11A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part GS1014V5 11A, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number GS1014V5 11A with NSN 5305-01-477-5971, 5305014775971

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-477-5971 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	014775971	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
11825V5-11A	5	2	5

Characteristics Data of NSN 5305-01-477-5971, 5305014775971

MRC	Criteria	Characteristic
AASB	FASTENER LENGTH	1.142 INCHES MINIMUM AND 1.172 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.312 INCHES NOMINAL
THSD	THREAD SERIES DESIGNATOR	UNJF
AAJD	THREAD CLASS	3A
CMLP	THREAD QUANTITY PER INCH	24
FEAT	SPECIAL FEATURES	95 KSI SHEAR STRENGTH
ABQJ	POINT STYLE	FLAT
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS
AAVA	POINT DIAMETER	0.469 INCHES NOMINAL
ANEE	GRIP LENGTH	0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM
MATT	MATERIAL	TITANIUM OVERALL
ABQZ	INTERNAL DRIVE STYLE	TORX
AASA	THREAD LENGTH	0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
AAUJ	SPLINE MAJOR DIAMETER	0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
CRSQ	COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AAJF	THREAD DIRECTION	RIGHT-HAND
AASL	HEAD DIAMETER	0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.312 INCHES

Schedule B & Trade

End Use : 12290	Nonferrous metals, other
Schedule B : 8108908000 (NAICS 331491)	Other wrought titanium, nesoi
SITC : 69985	Titanium, wrought, and articles of titanium, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9bqe--9
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	Q - 70.0
LTL:	W - Rating variable
NMFC:	186620 - Tools, noi hand other than power
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	732 - Tools, hand and portable, electric