Buy 2527232 Motor Alternating C part by Bae Systems Land And Armaments Inc

Part Number: 2527232

Manufacturer: bae systems land and armaments inc

NSN: 6105-00-191-2917

NIIN: 001912917

Item Name : motor alternating c

CAGE Code: 064S4

FSC: 6105 Motors Electrical

INC Code: 00530

Country: USA

NCB Code: 00

FSG: 61 Electric Wire and Power and Distribution Equipment

We've received your request for 2527232 (described as Motor Alternating C), manufactured by Bae Systems Land And Armaments Inc with CAGE code 064S4. This part is registered under NSN 6105-00-191-2917, classified in FSG 61 Electric Wire and Power and Distribution Equipment / FSC 6105 Motors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-191-2917, NCB code 00 (origin: USA), and INC 00530. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2527232 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2527232

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 2527232, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 2527232 with NSN 6105-00-191-2917, 6105001912917

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
6105-00-191-2917 Item PartTypeName: MOTOR,ALTERNATING CURRENT	6105	001912917	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2527232	2	2	3

Characteristics Data of NSN 6105-00-191-2917, 6105001912917

MRC	Criteria	Characteristic
AAJT	OVERALL HEIGHT	15.500 INCHES
AAJU	OVERALL LENGTH	26.875 INCHES
AAJV	OVERALL WIDTH	20.000 INCHES
AAUH	SPLINE MINOR DIAMETER	1.848 INCHES MINIMUM AND 1.859 INCHES MAXIMUM SINGLE END
ABSA	SPLINE QUANTITY	31 SINGLE END
ABWV	SHAFT DIAMETER	1.986 INCHES MINIMUM AND 1.991 INCHES MAXIMUM SINGLE END
AKPS	DUTY CYCLE	INTERMITTENT
ANPZ	ENCLOSURE FEATURE	SPRAY TIGHT
AXCP	WINDING TYPE	INDUCTION-SQUIRREL CAGE
AXFH	SPLINE LENGTH	2.0000 INCHES NOMINAL SINGLE END
AXGY	MOUNTING METHOD	FIXED BASE
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
BFLT	TIME INTERVAL	1.0 HOURS MAXIMUM ON
BFMF	COOLING METHOD	FAN COOLED
BKPB	CURRENT RATING METHOD	LOAD
BKPH	TORQUE RATING AND TYPE	246.8 FOOT-POUNDS STALLED AND 315.5 FOOT-POUNDS STARTING
BKPQ	INCLOSURE SPECIFICATION	COMMERCIAL
BTBY	SHAFT END STYLE	SPLINED SINGLE END
CBBL	FEATURES PROVIDED	VERTICAL MOUNTING POSITION
CNMM	FRAME SIZE DESIGNATION	324UNZ
CNXS	POWER RATING	40.0000 HORSEPOWER OUTPUT
CWCS	LENGTH OF SHAFT FROM HOUSING	3.750 INCHES SINGLE END
CWDM	SHAFT CENTER TO MOUNTING SURFACE DISTANCE	7.500 INCHES SINGLE END
CWDT	NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	10.500 INCHES
CWDY	TEMP RATING	50.0 AMBIENT DEG CELSIUS
CWFX	ROTOR SPEED RATING IN RPM	1800.0 SINGLE NO LOAD AND 1755.0 SINGLE FULL LOAD
CWFY	NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	14.000 INCHES
CWGL	CURRENT RATING IN AMPS	160.000 SINGLE INPUT
CWGQ	CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	440.0 LINE TO NEUTRAL SINGLE INPUT
FAAZ	PHASE	THREE INPUT
FREQ	FREQUENCY IN HERTZ	60.0 INPUT
TTQY	TERMINAL TYPE AND QUANTITY	3 SCREW

Schedule B & Trade

End Use : 20000	Generators, accessories
Schedule B : 8501528000 (NAICS 335312)	Ac motors, multi-phase, of an output exceeding 14.92 kw (20 hp) but not exceeding 75kw (100hp), nesoi
SITC : 71631	Electric motors of an output exceeding 37.5 w (including universal ac/dc motors), ac

Identification

ADPE	Represents items with no adp components
CRITL	The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	C
Classification Control	U
MGMT_CTL	7h--009
Quantity per pack	No qup
Repariability	If condemned or uneconomically repairable, then dispose at intermediate level.
Shelf Life	N/A
SOS	Nrp
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	Q - 70.0
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)