Buy 8100-3527-0120 ITEM NO 5 Switch Toggle part by Bath Iron Works Corporation

Part Number:  8100-3527-0120 ITEM NO 5
Alternate P/N:  810035270120ITEMNO5
Manufacturer:  bath iron works corporation
NIIN:  007199659
Item Name :  switch toggle
CAGE Code:  70876
FSC:  5930 Switches
INC Code:  00184
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 8100-3527-0120 ITEM NO 5 (described as Switch Toggle), manufactured by Bath Iron Works Corporation with CAGE code 70876. This part is registered under NSN 5930-00-719-9659, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 00-719-9659, NCB code 00 (origin: USA), and INC 00184. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 8100-3527-0120 ITEM NO 5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8100-3527-0120 ITEM NO 5

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 8100-3527-0120 ITEM NO 5, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 8100-3527-0120 ITEM NO 5 with NSN 5930-00-719-9659, 5930007199659

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-719-9659

Item PartTypeName:

SWITCH,TOGGLE

59300071996590PA
CIICHCCESDPMICCriticalityENAC
UAU0
Part NumberISCRNVCRNCCHCCMSDSSADC
29203-211395

Characteristics Data of NSN 5930-00-719-9659, 5930007199659

MRCCriteriaCharacteristic
AAQLBODY STYLEBUSHING MOUNT
ABHPOVERALL LENGTH1.375 INCHES NOMINAL
ABKWOVERALL HEIGHT1.375 INCHES NOMINAL
ABMKOVERALL WIDTH0.656 INCHES MAXIMUM
ABXDBUSHING LENGTH0.250 INCHES NOMINAL
ADAQBODY LENGTH1.375 INCHES NOMINAL
ADATBODY WIDTH0.656 INCHES MAXIMUM
ADAUBODY HEIGHT0.500 INCHES NOMINAL
AFUQACTUATOR STYLEROUND
AFUSACTUATOR HEIGHT0.563 INCHES NOMINAL
AFUXACTUATOR POSITION-ACTION RELATIONSHIPUP POSITION MAINTAINED AND DOWN POSITION MAINTAINED
AFXEMAXIMUM VOLTAGE RATING IN VOLTS250.0 AC
AGAVEND ITEM IDENTIFICATIONNUCLEAR POWER PLANTS; CONTROL PANEL CP-0008
AKNAINCLOSURE TYPEFULLY INCLOSED
AXGYMOUNTING METHODTHREADED BUSHING
CRLDNONPILE-UP CONTACT ARRANGEMENT1 POLE,DOUBLE THROW,DOUBLE BREAK/DOUBLE MAKE,PERMANENT JUMPER,BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
CWJKCASE MATERIALPLASTIC
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYSWITCH,TOGGLE,DPST (CAGE 85213)
CXQRCONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE3.000 AMPERES RESISTIVE AC
FEATSPECIAL FEATURESSWITCH-DPST,(SPARE) (CAGE 85213); GVT NO. MS16569-1
THSDTHREAD SERIES DESIGNATORUNS
TTQYTERMINAL TYPE AND QUANTITY4 WIRE LEAD
AFURACTUATOR DIAMETER0.094 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZE0.469 INCHES
ZZZKSPECIFICATION/STANDARD DATA96906-MS16569 GOVERNMENT STANDARD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top