Buy 1500 613 Resistor Variable W part by Bei Sensors And Systems Company Inc

Part Number: 1500 613

Manufacturer: bei sensors and systems company inc

NSN: 5905-00-973-7855

NIIN: 009737855

Item Name : resistor variable w

CAGE Code: 11534

FSC: 5905 Resistors

INC Code: 37408

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 1500 613 (described as Resistor Variable W), manufactured by Bei Sensors And Systems Company Inc with CAGE code 11534. This part is registered under NSN 5905-00-973-7855, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-973-7855, NCB code 00 (origin: USA), and INC 37408. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1500 613 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1500 613

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1500 613, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1500 613 with NSN 5905-00-973-7855, 5905009737855

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-973-7855 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	009737855		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
100-5482	C	2	5

Characteristics Data of NSN 5905-00-973-7855, 5905009737855

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	5
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABHP	OVERALL LENGTH	3.804 INCHES NOMINAL
ABPM	BODY DIAMETER	1.312 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.835 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL
ADAQ	BODY LENGTH	2.969 INCHES NOMINAL
ADAV	OVERALL DIAMETER	1.688 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	SLEEVE
AEEA	SWITCH TYPE	ROTARY
AEED	SWITCH VOLTAGE RATING IN VOLTS	28.0
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	352.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	1.00 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	0.75 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 6 OCLOCK
AEFP	NONTURN DEVICE RADIUS	0.562 INCHES NOMINAL
AEFY	SHAFT END PLAY	0.005 INCHES
AEFZ	SHAFT RUNOUT	0.002 INCHES
AEGA	LATERAL RUNOUT	0.005 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.002 INCHES
AEGC	SHAFT RADIAL PLAY	0.004 INCHES
AEGH	SWITCH OPERATING POSITION	START OF ROTATION
AEGJ	SWITCH CONTACT ARRANGEMENT	SINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING AND STANDARD BUSHING
CBBL	FEATURES PROVIDED	SWITCH
CQCC	ELECTRICAL RESISTANCE PER SECTION	12.5 KILOHMS 1ST SECTION AND 11.0 KILOHMS 2ND SECTION AND 1.0 KILOHMS 3RD SECTION AND 11.0 KILOHMS 4TH SECTION AND 6.5 KILOHMS 5TH SECTION
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.50 TO 0.50 ALL SECTIONS
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	105.0 ALL SECTIONS
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.75 FREE AIR ALL SECTIONS
CRGM	FUNCTION CONFORMITY PER SECTION	ALL SECTIONS INDEPENDENT LINEARITY
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-3.0 TO 3.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
CSBX	FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
CSCY	TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 ALL SECTIONS
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	40.0 ALL SECTIONS
CSDK	SWITCH CURRENT TYPE AND RATING IN AMPS	0.040 AC/DC
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINALS GOLD
PRMT	PRECIOUS MATERIAL	GOLD
TTQY	TERMINAL TYPE AND QUANTITY	17 TURRET

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533390080 (NAICS 334416)	Wirewound variable resistors, nesoi
SITC : 77233	Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	G - Item contains gold.

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small