Buy K3212-3 Crystal Unit Quartz part by Bliley Technologies Incorporated

Part Number:  K3212-3
Alternate P/N:  K32123
NIIN:  013997272
Item Name :  crystal unit quartz
CAGE Code:  71034
INC Code:  00196
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for K3212-3 (described as Crystal Unit Quartz), manufactured by Bliley Technologies Incorporated with CAGE code 71034. This part is registered under NSN 5955-01-399-7272, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5955 Oscillators Piezoelectric Crystals. Our verification process will confirm traceability through supporting identifiers including NIIN 01-399-7272, NCB code 01 (origin: USA), and INC 00196. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your K3212-3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for K3212-3

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part K3212-3, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number K3212-3 with NSN 5955-01-399-7272, 5955013997272

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5955-01-399-7272

Item PartTypeName:

CRYSTAL UNIT,QUARTZ

59550139972720NA
CIICHCCESDPMICCriticalityENAC
7AG0
Part NumberISCRNVCRNCCHCCMSDSSADC
8000131-003T527

Characteristics Data of NSN 5955-01-399-7272, 5955013997272

MRCCriteriaCharacteristic
ABMZDIAMETER0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-55.0/+75.0 DEG CELSIUS
CQBKCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.190 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS
CQYLDRIVE LEVEL RATING3.5 MILLIWATTS MINIMUM AND 4.5 MILLIWATTS MAXIMUM
CRMPEQUIVALENT RESISTANCE VALUE IN OHMS60.0 NOMINAL
PMLCPRECIOUS MATERIAL AND LOCATIONTERMINAL SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
ADAVOVERALL DIAMETER0.420 INCHES MAXIMUM
AEHFSHUNT CAPACITANCE IN PICOFARADS4.2 MINIMUM AND 5.0 MAXIMUM
AEHSHOLDER COVER MATERIALMETAL
ZZZKSPECIFICATION/STANDARD DATA82577-8000131-003T MANUFACTURERS SPECIFICATION CONTROL
AEBTTERMINAL DIAMETER0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM
ABJTTERMINAL LENGTH0.500 INCHES MINIMUM AND 0.830 INCHES MAXIMUM
ABHPOVERALL LENGTH0.220 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
AEHCMODE OF OSCILLATIONTHIRD OVERTONE
AEHDCIRCUIT RESONANCESERIES RESONANCE
AEHGSPECIFIED FREQUENCY93.100 MEGAHERTZ
AGAVEND ITEM IDENTIFICATIONF/A-18 RADAR, CAGE 76301
CRFXFREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.0001/+0.0001
STYLSTYLE DESIGNATORHAT TYPE, 3 WIRE LEADS
TESTTEST DATA DOCUMENT82577-8000131 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8541900000 (NAICS 334413) Diode, transistor & similar semiconductor device parts
SITC : 77688 Parts of diodes, transistors and similar semiconductor devices (including photosensitive), light emitting diodes and mounted piezoelectric crystals

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control 7
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063025 - Semiconductors/devices noi etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top