Buy 105C2E7 Synchro Receiver part by Bowmar Llc

Part Number: 105C2E7

Manufacturer: bowmar llc

NSN: 5990-00-983-7530

NIIN: 009837530

Item Name : synchro receiver

CAGE Code: 99479

INC Code: 02072

Country: USA

NCB Code: 00

We've received your request for 105C2E7 (described as Synchro Receiver), manufactured by Bowmar Llc with CAGE code 99479. This part is registered under NSN 5990-00-983-7530, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-983-7530, NCB code 00 (origin: USA), and INC 02072. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 105C2E7 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 105C2E7

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 105C2E7, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 105C2E7 with NSN 5990-00-983-7530, 5990009837530

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-983-7530 Item PartTypeName: SYNCHRO,RECEIVER	5990	009837530	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
105C2E5	C	9	5

Characteristics Data of NSN 5990-00-983-7530, 5990009837530

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND C
AAVH	SHOULDER DIAMETER	1.3114 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.4890 INCHES MINIMUM AND 2.5150 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	1.4340 INCHES MINIMUM AND 1.4400 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	1.3090 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0780 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.6220 INCHES MINIMUM AND 0.6420 INCHES MAXIMUM SINGLE SHAFT
AHYF	SECURING HOLE QUANTITY	4
AJSL	BODY SIZE	15
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	200.0 MILLIAMPERES NOMINAL
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	3.1 WATTS NOMINAL
AJTG	ZRO IMPEDANCE MAGNITUDE IN OHMS	675.50 NOMINAL
AJTH	ZRO IMPEDANCE ANGLE IN DEG	83.50 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	53.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	44.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	4.600 INPUT TO OUTPUT NOMINAL
AJVL	ELECTRICAL ERROR ANGULAR RANGE IN MINUTES	-3.0 TO 3.0
AJVM	SPLINE TOOTH QUANTITY	21 SINGLE SHAFT
AJVN	RECEIVER ERROR ANGULAR RANGE IN MINUTES	-45.0 TO 45.0
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	0.05 INCH-OUNCES NOMINAL
AJVV	TORQUE GRADIENT PER ANGULAR DEG	0.030 INCH-OUNCES NOMINAL
AJWQ	PILOT LENGTH	0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7690 INCHES MINIMUM AND 1.7750 INCHES MAXIMUM
AJXA	SPLINE TOOTH DIAMETRAL PITCH	120 SINGLE SHAFT
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
AKEJ	MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
CQTM	TERMINAL LOCATION	REAR
CQWQ	SHAFT THREAD LENGTH	0.2000 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CRSY	ALIGNMENT HOLE DEPTH	0.1250 INCHES NOMINAL
CRYY	MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER	0.112 INCHES
CSJY	TRANSFORMATION RATIO	0.767 ROTOR TO STATOR NOMINAL
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	1.1030 INCHES NOMINAL
CWBH	SHAFT NOMINAL THREAD SIZE	0.190 INCHES SINGLE SHAFT
TTQY	TERMINAL TYPE AND QUANTITY	5 TAB,SOLDER LUG

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)