Buy 08RC-0111-B Resolver Electrical part by Cda Intercorp Llc

Part Number: 08RC-0111-B

Alternate P/N: 08RC0111B

Manufacturer: cda intercorp llc

NSN: 5990-00-113-6081

NIIN: 001136081

Item Name : resolver electrical

CAGE Code: 51761

INC Code: 22966

Country: USA

NCB Code: 00

We've received your request for 08RC-0111-B (described as Resolver Electrical), manufactured by Cda Intercorp Llc with CAGE code 51761. This part is registered under NSN 5990-00-113-6081, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-113-6081, NCB code 00 (origin: USA), and INC 22966. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 08RC-0111-B requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 08RC-0111-B

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 08RC-0111-B, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 08RC-0111-B with NSN 5990-00-113-6081, 5990001136081

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-113-6081 Item PartTypeName: RESOLVER,ELECTRICAL	5990	001136081	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
08RC-0111-B	C	2	5

Characteristics Data of NSN 5990-00-113-6081, 5990001136081

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	STEEL,CORROSION RESISTING
AAQL	BODY STYLE	STANDARD ROUND A
AAVL	PILOT DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.6240 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3660 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	8
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	14.0 MILLIAMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	33.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	887.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	230.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	1224.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	625.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	180.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	10.800 INPUT TO OUTPUT NOMINAL
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	4.0 CENTIMETER-GRAMS NOMINAL
AJWH	SHAFT END PLAY	0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM
AJWQ	PILOT LENGTH	0.0380 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2400 INCHES MAXIMUM
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	3912.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	956.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0200 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM SINGLE SHAFT
CRKL	PLUS J ZRS REACTANCE IN OHMS	428.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	1.907 ROTOR TO STATOR NOMINAL
CWYF	SHAFT END PLAY DETERMINING WEIGHT	8.0 OUNCES
TTQY	TERMINAL TYPE AND QUANTITY	6 WIRE LEAD

Schedule B & Trade

End Use : 21610	Medicinal equipment
Schedule B : 9018903000 (NAICS 339112)	Anesthetic instruments and appliances and parts and accessories
SITC : 87229	Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9eh-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)