Buy CASE 660 TRENCHER Tractor Wheeled Ind part by Cnh Industrial America Llc

Part Number:  CASE 660 TRENCHER
Manufacturer:  cnh industrial america llc
NIIN:  015183989
Item Name :  tractor wheeled ind
CAGE Code:  10988
INC Code:  02704
Country:  USA
NCB Code:  01

We've received your request for CASE 660 TRENCHER (described as Tractor Wheeled Ind), manufactured by Cnh Industrial America Llc with CAGE code 10988. This part is registered under NSN 2420-01-518-3989, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-518-3989, NCB code 01 (origin: USA), and INC 02704. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CASE 660 TRENCHER requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CASE 660 TRENCHER

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part CASE 660 TRENCHER, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 2420-01-518-3989, 2420015183989

MRCCriteriaCharacteristic
ASQFENGINE MODEL NUMBER4-390
ABHEOUTSIDE DIAMETER35.000 INCHES NOMINAL
ABKVOUTSIDE DIAMETER31.000 INCHES NOMINAL
ABMKOVERALL WIDTH1.8 METERS NOMINAL
CHZTREAR WHEEL ARRANGEMENT CHARACTERISTICDUAL
CHZYREAR WHEEL STEERABLE FEATUREINCLUDED
CJBCHARD SURFACE OPERATION LIMITATIONUNLIMITED
CJJSDRAWBAR PULL790.0 POUNDS MINIMUM AND 870.0 POUNDS MAXIMUM
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCY660 TRENCHER
AXJDTRANSMISSION TYPEANY ACCEPTABLE
ABHPOVERALL LENGTH2.5 METERS NOMINAL
ABKWOVERALL HEIGHT2.3 METERS NOMINAL
AZBGENGINE TYPEDIESEL
CHZXREAR WHEEL DRIVE FEATUREINCLUDED
CHZZCENTER TO CENTER TREAD WIDTH BETWEEN FRONT WHEELS55.000 INCHES NOMINAL
CJBDMINIMUM UNDERCLEARANCE9.800 INCHES
CJBJATTACHMENT NOMENCLATURE AND QUANTITYPUSHDOZER, TRACTOR MOUNTING, ONE EACH; BACKHOE, TRACTOR MOUNTING, ONE EACH
CJBBCENTER TO CENTER TREAD WIDTH BETWEEN REAR WHEELS55.000 INCHES NOMINAL
CHZMFRONT WHEEL QUANTITY2
CHZPFRONT TIRE TYPESOLID RUBBER
CJBGTOW BAR/WHEEL CHOCK STOWAGE PROVISIONNOT INCLUDED
CHZSREAR WHEEL QUANTITY2
BXTDHINGED FRAME STEERING SYSTEMNOT INCLUDED
CJBFINTEGRALLY MOUNTED WINCHNOT INCLUDED
CJBHOPERATOR CAB ALL WEATHER OPERATION DESIGN FEATURENOT INCLUDED
CJBLAUXILIARY POWER SERVICING EQUIPMENTNOT INCLUDED
CHZNFRONT WHEEL ARRANGEMENT CHARACTERISTICDUAL
CHZRFRONT WHEEL STEERABLE FEATUREINCLUDED
ATJLENGINE MANUFACTURER NAMECASE
CHZWREAR TIRE TYPESOLID RUBBER
BBDHPERSONNEL CAPACITY1
BTRGFRONT WHEEL DRIVE FEATUREINCLUDED
FEATSPECIAL FEATURES17 GALLON FUEL TANK; 18 QUART COOLING SYSTEM; 4 CYLINDERS; HYDROSTATIC 4WD, WITH 4-WHEEL STEERING

Schedule B & Trade

End Use : 21200 Agricultural machinery, equipment
Schedule B : 8701901090 (NAICS 930000) Tractors, suitable for agricultural use, used, except track-laying type
SITC : 72249 Wheeled tractors, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top