Buy DT2047 Semiconductor Devic part by Compensated Devices Inc

Part Number:  DT2047
Manufacturer:  compensated devices inc
NIIN:  013685234
Item Name :  semiconductor devic
CAGE Code:  55801
INC Code:  20589
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for DT2047 (described as Semiconductor Devic), manufactured by Compensated Devices Inc with CAGE code 55801. This part is registered under NSN 5961-01-368-5234, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5961 Semiconductor Devices and Associated Hardware. Our verification process will confirm traceability through supporting identifiers including NIIN 01-368-5234, NCB code 01 (origin: USA), and INC 20589. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DT2047 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DT2047

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part DT2047, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DT2047 with NSN 5961-01-368-5234, 5961013685234

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5961-01-368-5234

Item PartTypeName:

SEMICONDUCTOR DEVICE,DIODE

59610136852340NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
862057-1223

Characteristics Data of NSN 5961-01-368-5234, 5961013685234

MRCCriteriaCharacteristic
ABBHINCLOSURE MATERIALGLASS OR CERAMIC
ABHPOVERALL LENGTH0.195 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
AFZCFUNCTION FOR WHICH DESIGNEDVOLTAGE REFERENCE
AGAVEND ITEM IDENTIFICATION5895-01-127-8134
CTMZSEMICONDUCTOR MATERIALSILICON
CTQXCURRENT RATING PER CHARACTERISTIC70.00 MILLIAMPERES REPETITIVE PEAK FORWARD CURRENT NOMINAL
CTSGMAXIMUM OPERATING TEMP PER MEASUREMENT POINT175.0 DEG CELSIUS AMBIENT AIR
TTQYTERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
ABJTTERMINAL LENGTH1.000 INCHES MINIMUM
ADAVOVERALL DIAMETER0.078 INCHES MINIMUM AND 0.107 INCHES MAXIMUM
AXGYMOUNTING METHODTERMINAL
CTQNVOLTAGE RATING IN VOLTS PER CHARACTERISTIC6.4 NOMINAL REGULATOR VOLTAGE, DC
CTQSVOLTAGE TOLERANCE IN PERCENT-2.0/+2.0
CTRDPOWER RATING PER CHARACTERISTIC475.0 MILLIWATTS SMALL-SIGNAL INPUT POWER, COMMON-COLLECTOR PRESET
TESTTEST DATA DOCUMENT13973-862057 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GE

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8541100070 (NAICS 334413) Diodes, other than photosensitve or led, with a current of 0.5 a or less
SITC : 77631 Diodes, not photosensitive nor light emitting diodes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 12b2---
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063025 - Semiconductors/devices noi etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top