Buy CC0870-00 Filter Low Pass part by Conolog Corporation

Part Number: CC0870-00

Alternate P/N: CC087000

Manufacturer: conolog corporation

NSN: 5915-01-062-0591

NIIN: 010620591

Item Name : filter low pass

CAGE Code: 32840

FSC: 5915 Filters and Networks

INC Code: 13911

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for CC0870-00 (described as Filter Low Pass), manufactured by Conolog Corporation with CAGE code 32840. This part is registered under NSN 5915-01-062-0591, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-062-0591, NCB code 01 (origin: USA), and INC 13911. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CC0870-00 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CC0870-00

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CC0870-00, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CC0870-00 with NSN 5915-01-062-0591, 5915010620591

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5915-01-062-0591 Item PartTypeName: FILTER,LOW PASS	5915	010620591	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	7			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
953219-1	5	2	5

Characteristics Data of NSN 5915-01-062-0591, 5915010620591

MRC	Criteria	Characteristic
ABKW	OVERALL HEIGHT	1.036 INCHES MAXIMUM
ADAQ	BODY LENGTH	3.500 INCHES MAXIMUM
ADAT	BODY WIDTH	0.880 INCHES MAXIMUM
ADAU	BODY HEIGHT	0.630 INCHES MAXIMUM
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	3.000 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.500 INCHES NOMINAL
AFGA	OPERATING TEMP RANGE	25.0 TO 45.0 DEG CELSIUS
AFSV	AVERAGE LIFE RATING IN HOURS	10000.0
AHAJ	REFERENCE FREQUENCY PER FUNCTION	362.5 KILOHERTZ BLANK
AHAQ	SOURCE IMPEDANCE RATING PER FUNCTION	100.0 OHMS BLANK
AHAS	LOAD IMPEDANCE PER FUNCTION	100.0 OHMS BLANK
AKEJ	MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
AKNA	INCLOSURE TYPE	ENCASED
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED STUD
CQDR	INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS	1.0 BLANK
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 PIN INPUT 1ST FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 PIN OUTPUT 2ND FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	2 PIN GROUND 3RD FUNCTION
CQFC	SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION	225.00 KILOHERTZ BLANK AND 500.00 KILOHERTZ BLANK AND 640.00 KILOHERTZ BLANK AND 1.25 MEGAHERTZ BLANK
CQJX	NOMINAL THREAD SIZE	0.138 INCHES
CQRG	BODY MATERIAL	METAL
CRBB	FREQUENCY BAND WIDTH PER FUNCTION	225.00 KILOHERTZ BLANK AND 500.00 KILOHERTZ BLANK
CRBC	DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS	3.0 MAXIMUM BLANK AND 18.6 MAXIMUM BLANK AND 30.0 MINIMUM BLANK AND 60.0 MINIMUM BLANK
STYL	STYLE DESIGNATOR	RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE

Schedule B & Trade

End Use : 41210	Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310)	Reception apparatus, nesoi
SITC : 76289	Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	7
MGMT_CTL	Sf9eh-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061400 - Condensers/parts noi/capacitors
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components