Buy RE184-2 Capacitor Fixed Mic part by Cornell Dubilier Electronics Corp

Part Number:  RE184-2
Alternate P/N:  RE1842
NIIN:  001338594
Item Name :  capacitor fixed mic
CAGE Code:  93790
INC Code:  00005
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for RE184-2 (described as Capacitor Fixed Mic), manufactured by Cornell Dubilier Electronics Corp with CAGE code 93790. This part is registered under NSN 5910-00-133-8594, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-133-8594, NCB code 00 (origin: USA), and INC 00005. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your RE184-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RE184-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part RE184-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number RE184-2 with NSN 5910-00-133-8594, 5910001338594

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5910-00-133-8594

Item PartTypeName:

CAPACITOR,FIXED,MICA DIELECTRIC

59100013385940P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
2307-111CA

Characteristics Data of NSN 5910-00-133-8594, 5910001338594

MRCCriteriaCharacteristic
AAQLBODY STYLEW/THD MTG HOLE(S)/STUD(S) TERMINALS ON ONE SURFACE
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH2.000 INCHES NOMINAL
ADAQBODY LENGTH2.251 INCHES NOMINAL
ADATBODY WIDTH1.875 INCHES NOMINAL
ADAUBODY HEIGHT0.500 INCHES NOMINAL
AEBKMAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS7.15
AEBLHIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ30.0
AEBMMAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS3.4
AEBNLOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ12.0
AEBTTERMINAL DIAMETER0.064 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH1.983 INCHES NOMINAL
AEBZSCHEMATIC DIAGRAM DESIGNATORELECTRODE(S) GROUNDED TO CASE
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.607 INCHES NOMINAL
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED MOUNTING HOLES
BWGPSECTION QUANTITY4
CBBLFEATURES PROVIDEDHERMETICALLY SEALED CASE
CQBQCAPACITANCE VALUE PER SECTION200.500 MICROFARADS 3RD SECTION
CQJJNONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM
CQJXNOMINAL THREAD SIZE0.086 INCHES
CQWMNONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION1500.0 AC-PEAK ALL SECTIONS
CRDNTEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 100.0 SINGLE SECTION
CRTPTOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT 1ST SECTION AND-2.00 TO 2.00 PERCENT 2ND SECTION AND-1.00 TO 1.00 PERCENT 3RD SECTION AND-1.00 TO 1.00 PERCENT 4TH SECTION
CWJKCASE MATERIALMETAL
CWPKINSULATION RESISTANCE AT REFERENCE TEMP10000.0 MEGOHMS
CWQFQUALITY FACTOR AT REFERENCE TEMP10000.0000
CWSGTERMINAL SURFACE TREATMENTSOLDER
TTQYTERMINAL TYPE AND QUANTITY4 UNINSULATED WIRE LEAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8532290020 (NAICS 334416) Fixed capacitors, mica dielectric, nesoi
SITC : 77867 Fixed capacitors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top