Buy MYLAR TUBING 7 8 INCH X 48 INCH Spacer Sleeve part by Corrosion Control Corporation

Part Number: MYLAR TUBING 7 8 INCH X 48 INCH

Manufacturer: corrosion control corporation

NSN: 5365-01-536-0523

NIIN: 015360523

Item Name : spacer sleeve

CAGE Code: 0JM95

FSC: 5365 Bushings Rings Shims and Spacers

INC Code: 13207

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MYLAR TUBING 7 8 INCH X 48 INCH (described as Spacer Sleeve), manufactured by Corrosion Control Corporation with CAGE code 0JM95. This part is registered under NSN 5365-01-536-0523, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-536-0523, NCB code 01 (origin: USA), and INC 13207. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MYLAR TUBING 7 8 INCH X 48 INCH requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MYLAR TUBING 7 8 INCH X 48 INCH

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MYLAR TUBING 7 8 INCH X 48 INCH, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MYLAR TUBING 7 8 INCH X 48 INCH with NSN 5365-01-536-0523, 5365015360523

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-01-536-0523 Item PartTypeName: SPACER,SLEEVE	5365	015360523	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4730-DA0-759895	5	9	5

Characteristics Data of NSN 5365-01-536-0523, 5365015360523

MRC	Criteria	Characteristic
ADAR	BODY OUTSIDE DIAMETER	1.0310 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MISCELLANEOUS PARTS SEA WATER SYSTEM--LPD (LANDING PLATFORM DOCK)
FEAT	SPECIAL FEATURES	DMATERIAL IS GLASS REINFORCED EPOXY, HAVING EXCELLENT RESISTANCE TO CRUSHING, CRACKING, BREAKING AND THREAD PINCH; USED WHEN TUBING IS CONTINUOUSLY EXPOSED TO TEMPEERATURE OF 350 DEGREES FAHRENHEIT
ABHP	OVERALL LENGTH	48.0000 INCHES NOMINAL
ADAS	BODY INSIDE DIAMETER	0.9060 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	INSULATION PIPE COVERING
MATT	MATERIAL	GLASS FIBER OVERALL
STYL	STYLE DESIGNATOR	SOLID, PLAIN, NO OUTSIDE FLANGES

Schedule B & Trade

End Use : 12760	Mineral supplies-manufactured
Schedule B : 7019905050 (NAICS 327993)	Glass fibers and articles thereof, nesoi
SITC : 66495	Glass fibers (including glass wool) and articles thereof, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	095190 - Hardware, noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware