Buy 2501 1IN RANGE 11TO15PSI Valve Safety Relief part by Crane Corp

Part Number:  2501 1IN RANGE 11TO15PSI
Manufacturer:  crane corp
NIIN:  002873199
Item Name :  valve safety relief
CAGE Code:  14959
INC Code:  05488
Country:  USA
NCB Code:  00
FSG:  48 Valves

We've received your request for 2501 1IN RANGE 11TO15PSI (described as Valve Safety Relief), manufactured by Crane Corp with CAGE code 14959. This part is registered under NSN 4820-00-287-3199, classified in FSG 48 Valves / FSC 4820 Valves Nonpowered. Our verification process will confirm traceability through supporting identifiers including NIIN 00-287-3199, NCB code 00 (origin: USA), and INC 05488. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2501 1IN RANGE 11TO15PSI requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2501 1IN RANGE 11TO15PSI

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 2501 1IN RANGE 11TO15PSI, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 2501 1IN RANGE 11TO15PSI with NSN 4820-00-287-3199, 4820002873199

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4820-00-287-3199

Item PartTypeName:

VALVE,SAFETY RELIEF

48200028731990N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
150 1IN 11-15PSI223

Characteristics Data of NSN 4820-00-287-3199, 4820002873199

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
AAJFTHREAD DIRECTIONRIGHT-HAND 2ND END
ADQUFLOW CONTROL DEVICEDISK
ADSRBONNET TYPEINSIDE SPRING
ADSTBONNET ATTACHMENT METHODINTEGRAL
ADSUDISK LOADING METHODSPRING
ADSYVALVE DISCHARGE FLOW RATE171.0 CUBIC FEET PER MINUTE
AEHZMAXIMUM OPERATING TEMP406.0 DEG FAHRENHEIT SINGLE RESPONSE
AHNCCONNECTION STYLEPLAIN (PIPE) 2ND END
AHNCCONNECTION STYLEPLAIN,OPTIONAL END(PIPE) 1ST END
AQLRVALVE OPERATION METHODAUTOMATIC OR MANUAL
AWLSCONNECTION TYPETHREADED EXTERNAL PIPE 2ND END
AWLSCONNECTION TYPETHREADED INTERNAL PIPE 1ST END
CBBLFEATURES PROVIDEDVALVE STEM LOCK SHIELD AND PRESSURE TIGHT OUTLET SIDE
CQCYADJUSTABLE PRESSURE RANGE11.0 TO 15.0 POUNDS PER SQUARE INCH
CQGMMAXIMUM OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
CQJXNOMINAL THREAD SIZE1.000 INCHES 1ST END
CQJXNOMINAL THREAD SIZE1.000 INCHES 2ND END
MATTMATERIALCOPPER ALLOY BODY
MATTMATERIALCOPPER ALLOY FLOW CONTROL DEVICE
MATTMATERIALCOPPER ALLOY SEAT
MATTMATERIALSTEEL STEM
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE BODYQQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICEQQ-390 FED SPEC SINGLE MATERIAL RESPONSE STEM
MEDAMEDIA FOR WHICH DESIGNEDSTEAM SINGLE RESPONSE
STYLSTYLE DESIGNATORANGLE
THSDTHREAD SERIES DESIGNATORNPT 1ST END
THSDTHREAD SERIES DESIGNATORNPT 2ND END

Schedule B & Trade

End Use : 21180 Industrial machines, other
Schedule B : 8481400000 (NAICS 332911) Safety or relief valves
SITC : 74740 Safety or relief valves

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 3b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 127220 - Pressure reg/red/relief valves noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 594 - Pumps and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top