Buy SPEG099-23-A60MIL Connector Receptacl part by Crane Electronics Inc

Part Number:  SPEG099-23-A60MIL
Alternate P/N:  SPEG09923A60MIL
Manufacturer:  crane electronics inc
NIIN:  013621544
Item Name :  connector receptacl
CAGE Code:  0AKZ5
INC Code:  01938
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for SPEG099-23-A60MIL (described as Connector Receptacl), manufactured by Crane Electronics Inc with CAGE code 0AKZ5. This part is registered under NSN 5935-01-362-1544, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-362-1544, NCB code 01 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SPEG099-23-A60MIL requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SPEG099-23-A60MIL

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SPEG099-23-A60MIL, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SPEG099-23-A60MIL with NSN 5935-01-362-1544, 5935013621544

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-362-1544

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350136215440PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
68693A60-MIL295

Characteristics Data of NSN 5935-01-362-1544, 5935013621544

MRCCriteriaCharacteristic
PMWTPRECIOUS MATERIAL AND WEIGHT0.060 GOLD GRAINS, TROY
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
AAQLBODY STYLESTRAIGHT SHAPE
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 TYPE II GRADE C,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
AFRVCONNECTOR LOCKING METHODFRICTION
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
AFQWMATING END QUANTITY1
CXCGINCLUDED CONTACT QUANTITY60 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPESQUARE PIN SINGLE MATING END SINGLE CONTACT GROUPING
ABKWOVERALL HEIGHT0.968 INCHES MINIMUM AND 0.998 INCHES MAXIMUM
AWTNOPERATING TEMP RATING-40.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM
CQYHCONTACT SURFACE TREATMENTGOLD SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS3.0 SINGLE MATING END SINGLE CONTACT GROUPING
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONASTM D-4066 ASSN STD 1ST MATERIAL RESPONSE AND ASTM D-4066 ASSN STD 2ND MATERIAL RESPONSE OR MIL-C-24519 MIL SPEC 3RD MATERIAL RESPONSE SINGLE MATING END
AFQXCONTACT POSITION ARRANGEMENT STYLE2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END
ABMKOVERALL WIDTH0.190 INCHES NOMINAL
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPEPIN SINGLE MATING END SINGLE CONTACT GROUPING
ABHPOVERALL LENGTH3.000 INCHES MAXIMUM
PRMTPRECIOUS MATERIALGOLD
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALGLASS FIBER AND PLASTIC POLYAMIDE AND PLASTIC SINGLE MATING END
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
SUPPSUPPLEMENTARY FEATURESMOUNTING METHOD - TERMINAL
AXGY(NON-CORE DATA) MOUNTING METHODTERMINAL

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top