Buy SPEG101Z-E03-MIL Contact Electrical part by Crane Electronics Inc

Part Number:  SPEG101Z-E03-MIL
Alternate P/N:  SPEG101ZE03MIL
Manufacturer:  crane electronics inc
NIIN:  013844988
Item Name :  contact electrical
CAGE Code:  0AKZ5
INC Code:  00443
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for SPEG101Z-E03-MIL (described as Contact Electrical), manufactured by Crane Electronics Inc with CAGE code 0AKZ5. This part is registered under NSN 5999-01-384-4988, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5999 Miscellaneous Electrical and Electronic Components. Our verification process will confirm traceability through supporting identifiers including NIIN 01-384-4988, NCB code 01 (origin: USA), and INC 00443. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SPEG101Z-E03-MIL requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SPEG101Z-E03-MIL

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SPEG101Z-E03-MIL, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SPEG101Z-E03-MIL with NSN 5999-01-384-4988, 5999013844988

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5999-01-384-4988

Item PartTypeName:

CONTACT,ELECTRICAL

59990138449880PA
CIICHCCESDPMICCriticalityENAC
UAG0
Part NumberISCRNVCRNCCHCCMSDSSADC
68001E03-MIL593

Characteristics Data of NSN 5999-01-384-4988, 5999013844988

MRCCriteriaCharacteristic
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS0.100 INCHES NOMINAL
ABHPOVERALL LENGTH0.435 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-81728 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 FED SPEC 2ND TREATMENT RESPONSE CONTACT ASTM D4066 ASSN STD 1ST TREATMENT RESPONSE OR MIL-M-24519E MIL STD 1ST TREATMENT RESPONSE CONTACT INSULATION
TTQYTERMINAL TYPE AND QUANTITY3 PIN END OPPOSITE CONTACT
AXGYMOUNTING METHODFORCE FIT
PMLCPRECIOUS MATERIAL AND LOCATIONBODY AND CONTACT GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY
PRMTPRECIOUS MATERIALGOLD
SFTTSURFACE TREATMENTTIN AND NICKEL CONTACT
AKRQPIN ACCOMMODATION DIAMETER0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM
MATTMATERIALCOPPER ALLOY CONTACT
ABKWOVERALL HEIGHT0.095 INCHES NOMINAL
ABMKOVERALL WIDTH0.100 INCHES NOMINAL
AKRSPIN LENGTH0.415 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
AKRVPIN WIDTH0.095 INCHES NOMINAL
FEATSPECIAL FEATURESCURRENT RATING : 3 TO 5 AMPS. TEMP. RANGE IS -40 DEG. C. TO 105 DEG. C. DIELECTRIC WITH STANDING VOLTAGE IS1,000 VOLTS RMS INSULATION RESISTANCE IS 5000 MEGOHMS.P
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-750 FED SPEC 1ST MATERIAL RESPONSE CONTACT
STYLSTYLE DESIGNATORPOST CONTACT
TESTTEST DATA DOCUMENT14933-86101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907040 (NAICS 335931) Electrical metal contacts for heading 8535, 8536 & 8537
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 12b2--1
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top