Buy LPF40-29 Filter Low Pass part by Dayton Granger Inc

Part Number: LPF40-29

Alternate P/N: LPF4029

Manufacturer: dayton granger inc

NSN: 5915-01-242-8679

NIIN: 012428679

Item Name : filter low pass

CAGE Code: 55635

FSC: 5915 Filters and Networks

INC Code: 13911

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for LPF40-29 (described as Filter Low Pass), manufactured by Dayton Granger Inc with CAGE code 55635. This part is registered under NSN 5915-01-242-8679, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-242-8679, NCB code 01 (origin: USA), and INC 13911. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your LPF40-29 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LPF40-29

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part LPF40-29, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number LPF40-29 with NSN 5915-01-242-8679, 5915012428679

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5915-01-242-8679 Item PartTypeName: FILTER,LOW PASS	5915	012428679	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
70600-01011-103	5	2	3

Characteristics Data of NSN 5915-01-242-8679, 5915012428679

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	4.750 INCHES NOMINAL
ADAQ	BODY LENGTH	4.388 INCHES NOMINAL
ADAT	BODY WIDTH	2.380 INCHES NOMINAL
ADAU	BODY HEIGHT	1.000 INCHES NOMINAL
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	4.375 INCHES NOMINAL
AECR	VIBRATION RESISTANCE RANGE IN HERTZ	10.0 TO 500.0
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.750 INCHES NOMINAL
AFGA	OPERATING TEMP RANGE	-55.0 TO 85.0 DEG CELSIUS
AHAJ	REFERENCE FREQUENCY PER FUNCTION	23.0 MEGAHERTZ BLANK
AHAQ	SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS BLANK
AHAS	LOAD IMPEDANCE PER FUNCTION	50.0 OHMS BLANK
AHBL	PRINCIPAL CIRCUITRY TYPE PER FUNCTION	INDUCTANCE-CAPACITANCE BLANK
AHBN	INPUT TERMINAL MANUFACTURER CODE	78286
AHBP	INPUT TERMINAL IDENTIFICATION	M39012/16-0014
AHBS	OUTPUT TERMINAL MANUFACTURER CODE	78286
AHBT	OUTPUT TERMINAL IDENTIFICATION	M39012/16-0014
AHBZ	VOLTAGE STANDING WAVE RATIO PER FUNCTION	1.5 BLANK
AHCH	AVERAGE POWER RATING PER FUNCTION	25.0 WATTS BLANK
AKNA	INCLOSURE TYPE	HERMETICALLY SEALED
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
CBBL	FEATURES PROVIDED	MOISTURE RESISTANT AND SHOCK RESISTANT
CQDR	INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS	0.5 BLANK
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CQFC	SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION	30.00 MEGAHERTZ BLANK AND 76.00 MEGAHERTZ BLANK AND 116.00 MEGAHERTZ BLANK AND 135.00 MEGAHERTZ BLANK
CQRG	BODY MATERIAL	METAL
CRBB	FREQUENCY BAND WIDTH PER FUNCTION	30.00 MEGAHERTZ BLANK AND 76.00 MEGAHERTZ BLANK
CRBC	DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS	3.0 MINIMUM BLANK AND 70.0 MAXIMUM BLANK
CRBN	VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION	30.0 MEGAHERTZ BLANK AND 76.0 MEGAHERTZ BLANK
STYL	STYLE DESIGNATOR	RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210	Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310)	Reception apparatus, nesoi
SITC : 76289	Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061400 - Condensers/parts noi/capacitors
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components