Buy 4NS0T4E12-HAC Switch Radio Freque part by Dbp Microwave Inc

Part Number: 4NS0T4E12-HAC

Alternate P/N: 4NS0T4E12HAC

Manufacturer: dbp microwave inc

NSN: 5985-01-156-9088

NIIN: 011569088

Item Name : switch radio freque

CAGE Code: 25656

FSC: 5985 Antennas Waveguides and Related Equipment

INC Code: 05298

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 4NS0T4E12-HAC (described as Switch Radio Freque), manufactured by Dbp Microwave Inc with CAGE code 25656. This part is registered under NSN 5985-01-156-9088, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-156-9088, NCB code 01 (origin: USA), and INC 05298. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4NS0T4E12-HAC requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4NS0T4E12-HAC

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 4NS0T4E12-HAC, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4NS0T4E12-HAC with NSN 5985-01-156-9088, 5985011569088

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5985-01-156-9088 Item PartTypeName: SWITCH,RADIO FREQUENCY TRANSMISS	5985	011569088		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4NS0T4E12-HAC	6	9	5

Characteristics Data of NSN 5985-01-156-9088, 5985011569088

MRC	Criteria	Characteristic
AAQL	BODY STYLE	IRREGULAR
ABMK	OVERALL WIDTH	3.375 INCHES NOMINAL
ACZB	FREQUENCY RATING	0.0 GIGAHERTZ MINIMUM AND 9.0 GIGAHERTZ MAXIMUM 1ST FREQUENCY VOLTAGE STANDING WAVE RATIO0.0 GIGAHERTZ MINIMUM AND 6.2 GIGAHERTZ MAXIMUM 1ST FREQUENCY INSERTION LOSS REFERENCE9.0 GIGAHERTZ MINIMUM AND 12.4 GIGAHERTZ MAXIMUM 2ND FREQUENCY
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.171 INCHES MINIMUM AND 0.177 INCHES MAXIMUM
AEEA	SWITCH TYPE	NONTRANSFER
AFDS	LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	2.880 INCHES NOMINAL SINGLE MOUNTING FACILITY PATTERN
AFDV	LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS	1.000 INCHES NOMINAL SINGLE MOUNTING FACILITY PATTERN
AFGA	OPERATING TEMP RANGE	-0.0 TO 50.0 DEG CELSIUS
AHTW	VOLTAGE STANDING WAVE RATIO	1.30 1ST
AHTW	VOLTAGE STANDING WAVE RATIO	1.50 2ND
AHTX	INSERTION LOSS IN DECIBELS	0.30 1ST
AHTX	INSERTION LOSS IN DECIBELS	0.40 2ND
AHTX	INSERTION LOSS IN DECIBELS	0.50 3RD
AHUC	COAXIAL CONNECTOR SERIES DESIGNATION	SMA
AHUD	CONNECTOR END DESIGN	FEMALE
AKAE	MAXIMUM OPERATING ALTITUDE RATING	10000.0 FEET
AKNF	RF POWER HANDLING CAPABILITY	1.0 WATTS AVERAGE SINGLE
AKNV	MINIMUM CROSSTALK RATING IN DECIBELS	60.0 SINGLE
AKPC	ACTUATOR OPERATING METHOD	RELAY
AKPJ	ACTUATOR VOLTAGE IN VOLTS	115.0 NOMINAL
AKPN	SWITCH OPERATION SEQUENCE	MAKES BEFORE BREAKS
AKPP	SWITCHING TIME	30.0 MILLISECONDS
AKPQ	SWITCH RETURN MECHANISM TYPE	FAIL-SAFE
AKPX	POLE QUANTITY	1
AKPY	THROW QUANTITY	4
AKRC	COUPLING POSITION QUANTITY	6
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 BRACKET AND 4 UNTHREADED HOLE
CQYJ	MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY PATTERN
MATT	MATERIAL	ALUMINUM BODY
MATT	MATERIAL	COPPER ALLOY CONTACT(S)
PMLC	PRECIOUS MATERIAL AND LOCATION	REEDS AND CENTER CONDUCTORS SURFACES GOLD
PRMT	PRECIOUS MATERIAL	GOLD
SFTT	SURFACE TREATMENT	GOLD CONTACT(S) OUTSIDE SURFACES
SFTT	SURFACE TREATMENT	NICKEL BODY OUTSIDE SURFACES
TTQY	TERMINAL TYPE AND QUANTITY	5 CONNECTOR,RECEPTACLE AND 1 RECEPTACLE,COAXIAL
ZZZK	SPECIFICATION/STANDARD DATA	82577-926246 MANUFACTURERS SPECIFICATION CONTROL

Schedule B & Trade

End Use : 21400	Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220)	Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493	Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	G - Item contains gold.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9n-----
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	S9e
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061300 - Circuit breaker/switch noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	723 - Radio parts and equipment, excluding tubes packed separately