Buy 28-300 W52-964 Saw Band Metal Cutt part by Delta Intl Machinery Corp

Part Number: 28-300 W52-964

Alternate P/N: 28300W52964

Manufacturer: delta intl machinery corp

NSN: 3405-01-138-3120

NIIN: 011383120

Item Name : saw band metal cutt

CAGE Code: 83738

INC Code: 17908

Country: USA

NCB Code: 01

We've received your request for 28-300 W52-964 (described as Saw Band Metal Cutt), manufactured by Delta Intl Machinery Corp with CAGE code 83738. This part is registered under NSN 3405-01-138-3120, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-138-3120, NCB code 01 (origin: USA), and INC 17908. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 28-300 W52-964 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 28-300 W52-964

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 28-300 W52-964, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 3405-01-138-3120, 3405011383120

MRC	Criteria	Characteristic
SR-1	SPEC/STD CONTROLLING DATA
AWLX	ELECTRIC MOTOR QUANTITY	1
BNBB	TABLE TYPE	TILTING
ZZZT	NONDEFINITIVE SPEC/STD DATA	14 SIZE
ACDC	CURRENT TYPE	AC
SR-5	MANUFACTURERS CODE	83738
FAAZ	PHASE	SINGLE
FEAT	SPECIAL FEATURES	24V PUSH BUTTON STARTER,P/N 52-964, SAW, BAND, METAL CUTTING
ACZB	FREQUENCY RATING	60.0 HERTZ NOMINAL
BWLY	TABLE RIGHT TILT ANGLE IN DEG	45.0
BWMH	BLADE MAXIMUM WIDTH ACCOMMODATED	0.750 INCHES
BWNB	CUTTING SPEED QUANTITY	8
BWND	POWER FEED FEATURE	NOT PROVIDED
BWNG	BUILT-IN COOLANT SYSTEM	NOT INCLUDED
BWNH	INTEGRAL BUTT WELDER	NOT INCLUDED
BWNJ	INTEGRAL GRINDER	NOT INCLUDED
SR-1	NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	A-A-59336
SR-5	THE MANUFACTURERS DATA
AQCL	THROAT DEPTH	13.750 INCHES NOMINAL
AMSE	VOLTAGE RATING	115.0 VOLTS NOMINAL
SR-1	MANUFACTURERS CODE	58536
AQLX	BRAKING FACILITY	NOT INCLUDED
BWMC	BAND TYPE FOR WHICH DESIGNED	SAW BLADE
BWMG	BLADE MAXIMUM LENGTH ACCOMMODATED	94.000 INCHES
BWML	VISE	NOT PROVIDED
BWMN	DISTANCE BETWEEN GUIDE AND TABLE	6.250 INCHES NOMINAL
BWMZ	CUTTING SPEED RANGE	40.0 TO 3000.0 FEET PER MINUTE
AMZE	ROTATIONAL SPEED RATING IN RPM	1725.0
ANCY	HORSEPOWER RATING	0.750
ARCM	DRIVE METHOD	ELECTRIC MOTOR
ARDQ	TABLE LENGTH	14.000 INCHES NOMINAL
ARDR	TABLE WIDTH	14.000 INCHES NOMINAL
AAXX	MOUNTING TYPE	FLOOR
ALDF	FRAME TYPE	RIGID
SR-5	DESIGN CONTROL REFERENCE	28-303 W/520964

Schedule B & Trade

End Use : 21120	Metalworking machine tools
Schedule B : 8461500090 (NAICS 333517)	Sawing or cutting-off machines, metal removing, except numerically controlled, valued $3, 025 over, new
SITC : 73177	Sawing or cutting-off machines, metalworking

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	E2100n-
Quantity per pack	1
Repariability	If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	131670 - Tools pwr o/t pwr hnd tools
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment