Buy 28-364 Saw Band Metal Cutt part by Delta Intl Machinery Corp

Part Number: 28-364

Alternate P/N: 28364

Manufacturer: delta intl machinery corp

NSN: 3405-00-469-9775

NIIN: 004699775

Item Name : saw band metal cutt

CAGE Code: 83738

FSC: 3405 Saws and Filing Machines

INC Code: 17908

Country: USA

NCB Code: 00

FSG: 34 Metalworking Machinery

We've received your request for 28-364 (described as Saw Band Metal Cutt), manufactured by Delta Intl Machinery Corp with CAGE code 83738. This part is registered under NSN 3405-00-469-9775, classified in FSG 34 Metalworking Machinery / FSC 3405 Saws and Filing Machines. Our verification process will confirm traceability through supporting identifiers including NIIN 00-469-9775, NCB code 00 (origin: USA), and INC 17908. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 28-364 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 28-364

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 28-364, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 3405-00-469-9775, 3405004699775

MRC	Criteria	Characteristic
ANCY	HORSEPOWER RATING	2
BWLY	TABLE RIGHT TILT ANGLE IN DEG	45
AMSE	VOLTAGE RATING	220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM
BNBB	TABLE TYPE	TILTING
ARDR	TABLE WIDTH	24.250 INCHES NOMINAL
SR-5	DESIGN CONTROL REFERENCE	28-364
AKYD	ACCESSORY COMPONENTS AND QUANTITY	CHIP BLOWER,1;LAMP ATTACHMENT,1
AMZE	ROTATIONAL SPEED RATING IN RPM	1725.0
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	ANCY,ACDC,AMSE,ACZB,FAAZ,AWLX,AKYD
BWLZ	TABLE LEFT TILT ANGLE IN DEG	12.0
BWMG	BLADE MAXIMUM LENGTH ACCOMMODATED	142.500 INCHES
BWML	VISE	NOT PROVIDED
BWNC	INFINITE CUTTING SPEED FEATURE	PROVIDED
BWNG	BUILT-IN COOLANT SYSTEM	NOT INCLUDED
SR-5	MANUFACTURERS CODE	83738
SR-5	THE MANUFACTURERS DATA
FAAZ	PHASE	THREE
AQCL	THROAT DEPTH	20.000 INCHES NOMINAL
BWMZ	CUTTING SPEED RANGE	50.0 TO 4500.0 FEET PER MINUTE
BWNH	INTEGRAL BUTT WELDER	INCLUDED
ACDC	CURRENT TYPE	AC
ARCM	DRIVE METHOD	ELECTRIC MOTOR
ARDQ	TABLE LENGTH	24.250 INCHES NOMINAL
AAXX	MOUNTING TYPE	FLOOR
AWLX	ELECTRIC MOTOR QUANTITY	1
ACZB	FREQUENCY RATING	60.0 HERTZ NOMINAL
AQLX	BRAKING FACILITY	NOT INCLUDED
ALDF	FRAME TYPE	RIGID
BWMC	BAND TYPE FOR WHICH DESIGNED	SAW BLADE
BWMH	BLADE MAXIMUM WIDTH ACCOMMODATED	1.000 INCHES
BWND	POWER FEED FEATURE	NOT PROVIDED
BWNJ	INTEGRAL GRINDER	INCLUDED
BWMN	DISTANCE BETWEEN GUIDE AND TABLE	12.000 INCHES NOMINAL

Schedule B & Trade

End Use : 21120	Metalworking machine tools
Schedule B : 8461500090 (NAICS 333517)	Sawing or cutting-off machines, metal removing, except numerically controlled, valued $3, 025 over, new
SITC : 73177	Sawing or cutting-off machines, metalworking

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	--y---n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Flz
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	W - Rating variable
LTL:	J - 100.0
NMFC:	131670 - Tools pwr o/t pwr hnd tools sub2
SHC:	Z - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment