Buy CS4510-0131 Sink Scullery part by Dla Land And Maritime

Part Number: CS4510-0131

Alternate P/N: CS45100131

Manufacturer: dla land and maritime

NSN: 4510-00-299-2735

NIIN: 002992735

Item Name : sink scullery

CAGE Code: 16236

INC Code: 08567

Country: USA

NCB Code: 00

We've received your request for CS4510-0131 (described as Sink Scullery), manufactured by Dla Land And Maritime with CAGE code 16236. This part is registered under NSN 4510-00-299-2735, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-299-2735, NCB code 00 (origin: USA), and INC 08567. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CS4510-0131 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CS4510-0131

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CS4510-0131, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 4510-00-299-2735, 4510002992735

MRC	Criteria	Characteristic
ABMK	Overall Width	27.000 INCHES MINIMUM AND 27.500 INCHES MAXIMUM
BJQW	Integral Drainboard	INCLUDED
BJQY	Splash Back	PROVIDED
BJRD	Rim Design	ROLL
BJRH	Drain Opening Diameter	1.500 INCHES NOMINAL
BJRL	Center To Center Distance Between Hot/Cold Supply Openings	8.000 INCHES NOMINAL
BJRN	Separate Drinking Water Supply Opening	NOT PROVIDED
BJQZ	Splash Back Corner	NOT PROVIDED
BJRC	Ledge Back	NOT PROVIDED
BJRJ	Drain Opening Location	CENTER
BJRK	Supply Opening Location	SPLASH BACK
BJRP	Spray Opening	NOT PROVIDED
BJQX	Drainboard Location	LEFT HAND SIDE
BJRF	Steam Water Heater	NOT INCLUDED
BJRM	Spout Opening	NOT PROVIDED
MRC	Decoded Requirement	Clear Text Reply
SFTT	Surface Treatment	ZINC
HGTH	Height	15.000 INCHES NOMINAL
ABHP	Overall Length	61.000 INCHES MINIMUM AND 62.000 INCHES MAXIMUM
AKYN	Furnished Items And Quantity	DRAIN,SINK WITH 1.500 IN. OD TAILPIECE 1,FAUCETS,HOSE AND CONNECTIONS 2,P-TRAP 1.500 IN. 1 AND STOPPER,RUBBER W/CHAIN 1
AAXX	Mounting Type	LEG
AFPV	Compartment Quantity	1
BGZC	Compartment Depth	16.000 INCHES NOMINAL
MATT	Material	STEEL
BHRW	Distance From Floor To Top Of Rim	36.000 INCHES NOMINAL

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	158880 - Plumber's goods: bath fixtures
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	736 - Plumbing supplies