Buy R2-10078-4MODEL7B Resistor Variable N part by Donel Systems Llc

Part Number:  R2-10078-4MODEL7B
Alternate P/N:  R2100784MODEL7B
Manufacturer:  donel systems llc
NIIN:  006553628
Item Name :  resistor variable n
CAGE Code:  98659
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for R2-10078-4MODEL7B (described as Resistor Variable N), manufactured by Donel Systems Llc with CAGE code 98659. This part is registered under NSN 5905-00-655-3628, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-655-3628, NCB code 00 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your R2-10078-4MODEL7B requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for R2-10078-4MODEL7B

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part R2-10078-4MODEL7B, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number R2-10078-4MODEL7B with NSN 5905-00-655-3628, 5905006553628

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-655-3628

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050065536280N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
14C1-2836225

Characteristics Data of NSN 5905-00-655-3628, 5905006553628

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.7495 INCHES MINIMUM AND 0.7505 INCHES MAXIMUM
AAVMPILOT LENGTH0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM
ABHPOVERALL LENGTH1.237 INCHES NOMINAL
ABNBFIRST FLAT LENGTH0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER0.781 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
ABPMBODY DIAMETER0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
ABXFSHAFT LENGTH0.602 INCHES NOMINAL
ADAQBODY LENGTH0.635 INCHES NOMINAL
ADAVOVERALL DIAMETER1.007 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,V FLATTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION310.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE0.15 INCH-OUNCES
AXGYMOUNTING METHODFLANGE
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER80.0 SINGLE SECTION
CQTMTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-500.0 TO 500.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER20.0 SINGLE SECTION
FEATSPECIAL FEATURES30 DEG MECHANICAL OVERTRAVEL
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top