Buy FH6C16CP-S01GY Screw Machine part by Dupree Inc

Part Number: FH6C16CP-S01GY

Alternate P/N: FH6C16CPS01GY

Manufacturer: dupree inc

NSN: 5305-01-229-8949

NIIN: 012298949

Item Name : screw machine

CAGE Code: 66071

FSC: 5305 Screws

INC Code: 06657

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for FH6C16CP-S01GY (described as Screw Machine), manufactured by Dupree Inc with CAGE code 66071. This part is registered under NSN 5305-01-229-8949, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 01-229-8949, NCB code 01 (origin: USA), and INC 06657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your FH6C16CP-S01GY requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FH6C16CP-S01GY

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part FH6C16CP-S01GY, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5305-01-229-8949, 5305012298949

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AASA	THREAD LENGTH	0.851 INCHES MINIMUM AND 0.943 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
CMLP	THREAD QUANTITY PER INCH	32
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
CYBA	SCREW SURFACE TREATMENT	PAINT AND PASSIVATE
THSD	THREAD SERIES DESIGNATOR	UNC
ZZZT	NONDEFINITIVE SPEC/STD DATA	3 TYPE AND 3C STYLE
AAJF	THREAD DIRECTION	RIGHT-HAND
AASB	FASTENER LENGTH	0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
AASL	HEAD DIAMETER	0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.138 INCHES
CYAU	SCREW MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR
CYBE	SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	595 6307 FED STD 1ST TREATMENT RESPONSE OR MIL-E-15090 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE
HUES	COLOR	GRAY

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.