Buy 64-964AMG4 Circuit Breaker part by Eaton Corporation

Part Number: 64-964AMG4

Alternate P/N: 64964AMG4

Manufacturer: eaton corporation

NSN: 5925-00-754-9191

NIIN: 007549191

Item Name : circuit breaker

CAGE Code: 74193

FSC: 5925 Circuit Breakers

INC Code: 00136

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 64-964AMG4 (described as Circuit Breaker), manufactured by Eaton Corporation with CAGE code 74193. This part is registered under NSN 5925-00-754-9191, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5925 Circuit Breakers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-754-9191, NCB code 00 (origin: USA), and INC 00136. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 64-964AMG4 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 64-964AMG4

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 64-964AMG4, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 64-964AMG4 with NSN 5925-00-754-9191, 5925007549191

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5925-00-754-9191 Item PartTypeName: CIRCUIT BREAKER	5925	007549191		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3X1163MG4-416VAC11AMP12TDC	2	9	5

Characteristics Data of NSN 5925-00-754-9191, 5925007549191

MRC	Criteria	Characteristic
ADAT	BODY WIDTH	4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM
ADAU	BODY HEIGHT	2.677 INCHES MINIMUM AND 2.697 INCHES MAXIMUM
AEBQ	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.190 INCHES NOMINAL
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AKPX	POLE QUANTITY	3
APNQ	ARC QUENCHING METHOD	MAGNETIC BLOWOUT
CPLM	MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	11.0 AMPERES AC ALL LOCATIONS
CPRG	MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	5000.0 AC ALL LOCATIONS
CPRJ	TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
CPRN	ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	150.0 ALL LOCATIONS
CPRQ	RESET METHOD	MANUAL
CPRT	MANUAL ACTUATOR TYPE AND QUANTITY	3 TOGGLE
CPRY	EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE,TWO,AND THREE LINKED
FREQ	FREQUENCY IN HERTZ	400.0 ALL LOCATIONS
THSD	THREAD SERIES DESIGNATOR	UNC
AAQL	BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
ADAQ	BODY LENGTH	5.240 INCHES MINIMUM AND 5.260 INCHES MAXIMUM
AEBP	CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	4.349 INCHES MINIMUM AND 4.369 INCHES MAXIMUM
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
AJEC	BOSS HEIGHT	0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	12 THREADED HOLE AND 12 UNTHREADED HOLE
BBRG	STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
CMLP	THREAD QUANTITY PER INCH	32
CPRF	OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	416.0 AC ALL LOCATIONS
CPRH	CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
CPRL	TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
CPRR	MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
CPRW	ACTUATOR FUNCTION	TRIP-RESET
CPRX	ACTUATOR POSITION DESIGNATION	AT EACH POLE
CPSM	INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
CQJX	NOMINAL THREAD SIZE	0.164 INCHES
CQWN	TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	5.500 MINIMUM AT 200 PCT AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS
CQXF	INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	DUSTPROOF AND FUNGUS PROOF
CWJK	CASE MATERIAL	PLASTIC
TTQY	TERMINAL TYPE AND QUANTITY	6 COMPRESSION

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8536200040 (NAICS 335313)	Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77252	Automatic circuit breakers for a voltage not exceeding 1, 000 volts

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	P - 77.5
NMFC:	061300 - Circuit breaker/switch noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small