Buy 400-8443 Gage Thickness Dial part by Eaton Industrial Corporation

Part Number: 400-8443

Alternate P/N: 4008443

Manufacturer: eaton industrial corporation

NSN: 5210-01-279-7823

NIIN: 012797823

Item Name : gage thickness dial

CAGE Code: 59875

FSC: 5210 measuring Tools Craftsmens

INC Code: 05934

Country: USA

NCB Code: 01

FSG: 52 Measuring Tools

We've received your request for 400-8443 (described as Gage Thickness Dial), manufactured by Eaton Industrial Corporation with CAGE code 59875. This part is registered under NSN 5210-01-279-7823, classified in FSG 52 Measuring Tools / FSC 5210 measuring Tools Craftsmens. Our verification process will confirm traceability through supporting identifiers including NIIN 01-279-7823, NCB code 01 (origin: USA), and INC 05934. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 400-8443 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 400-8443

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 400-8443, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 400-8443 with NSN 5210-01-279-7823, 5210012797823

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5210-01-279-7823 Item Description: Gage Thickness Dial	5210	012797823	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	M			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
400-8443		2	3

Characteristics Data of NSN 5210-01-279-7823, 5210012797823

MRC	Criteria	Characteristic
AGAV	END ITEM IDENTIFICATION	F108 ENGINE
SR-5	MANUFACTURERS CODE	59875
SR-5	THE MANUFACTURERS DATA
SR-5	DESIGN CONTROL REFERENCE	400-8443
TEXT	GENERAL CHARACTERISTICS ITEM DESCRIPTION	USED TO DETERMINE THICKNESS OF DRIVE SHAFT END SHIM,TOOL CONSISTS OF TWO SETS,A ""SEAL"" SET WITH A BASE ITEM 4 AND A PILOT ITEM 3 TO RECEIVE PARTS,A BODY ITEM 9 WITH A SHIM ITEM 7,AND AN INSERT ITEM 8,A DIAL INDICATOR ITEM 1 TO DETERMINE DIMENSION,AND A SET MASTER,ITEM 6,A ""DRIVE GEAR"" SET,WITH A BODY ITEM 14 RECEIVING A DIAL INDICATOR ITEM 13 AND A SET MASTER,ITEM 13

Schedule B & Trade

End Use : 21160	Measuring, testing, control instruments
Schedule B : 9017308000 (NAICS 332216)	Gauges for measuring length
SITC : 87423	Instruments for measuring length, for use in the hand (including measuring rods and tapes, micrometers, calipers), n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.