We've received your request for MFL 75 (described as Elbow Electrical Co), manufactured by Egs Electrical Corporation with CAGE code 03743. This part is registered under NSN 5975-00-426-8755, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-426-8755, NCB code 00 (origin: USA), and INC 06944. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your MFL 75 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-00-426-8755 Item PartTypeName: ELBOW,ELECTRICAL CONDUIT | 5975 | 004268755 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7-701 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABEX | DEFLECTION ANGLE | 90.0 DEGREES |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WEATHERPROOF-NEMA TYPE 3 |
| AELS | CONDUIT TYPE ACCOMMODATED | RIGID METALLIC THICKWALL FIRST END |
| AELS | CONDUIT TYPE ACCOMMODATED | RIGID METALLIC THICKWALL SECOND END |
| APTD | END TYPE | EXTERNAL THREAD SECOND END |
| APTD | END TYPE | INTERNAL THREAD FIRST END |
| CQYR | ITEM ACCOMMODATED TRADE SIZE | 0.750 INCHES FIRST END |
| CQYR | ITEM ACCOMMODATED TRADE SIZE | 0.750 INCHES SECOND END |
| MATT | MATERIAL | IRON MALLEABLE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STYL | STYLE DESIGNATOR | PULLING-TOP COVER PLATE |
| End Use : 12110 | Iron and steel products, other |
|---|---|
| Schedule B : 7307929000 (NAICS 332919) | Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes |
| SITC : 67959 | Iron and steel tube and pipe fittings, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062010 - Fittings conduit noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
