We've received your request for 77713-03X2 (described as Shaft Propulsion Sh), manufactured by Electric Boat Corporation with CAGE code 96169. This part is registered under NSN 2010-00-469-6768, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-469-6768, NCB code 00 (origin: USA), and INC 03044. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 77713-03X2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| ABRR | KEYWAY WIDTH | 1.813 INCHES MINIMUM AND 1.876 INCHES MAXIMUM |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| NMBR | QUANTITY | 2 |
| CTKF | TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | 17.375 INCHES NOMINAL |
| ARQS | CONSTRUCTION | HOLLOW |
| ABET | THREAD LENGTH | 8.500 INCHES |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPJL | FORWARD END COUPLING LENGTH | 1.375 FEET NOMINAL |
| CPJM | FORWARD END COUPLING THICKNESS | 1.688 INCHES NOMINAL |
| CPJG | AFTER END KEYWAY | PROVIDED |
| CPJJ | FORWARD END COUPLING TYPE | SLEEVE |
| ABKV | OUTSIDE DIAMETER | 16.000 INCHES NOMINAL |
| AEVE | KEYWAY QUANTITY | 3 AND 1 |
| AEJZ | DEPTH | 1.625 INCHES NOMINAL |
| SR-5 | MANUFACTURERS CODE | 96169 |
| SR-5 | THE MANUFACTURERS DATA | |
| BPJZ | USAGE LOCATION | CENTER |
| MATL | MATERIAL | STEEL,MIL-S-23284,COLD ROLLED |
| ABHP | OVERALL LENGTH | 35.281 FEET NOMINAL |
| SR-5 | DESIGN CONTROL REFERENCE | 77713-03X2 |
| CPJF | FORWARD END KEYWAY | PROVIDED |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | 28.000 INCHES NOMINAL |
| ABND | TAPER LENGTH | 3.000 FEET NOMINAL |
| CPNF | THREADED FORWARD END | NOT INCLUDED |
| CPTD | THREADED AFTER END | INCLUDED |
| CPTG | FORWARD BEARING SLEEVE LENGTH | 3.120 FEET NOMINAL |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| CTMS | FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| AAZR | MAJOR DIAMETER | 10.000 INCHES NOMINAL |
| ABGL | WIDTH | 2.750 INCHES MINIMUM AND 2.812 INCHES MAXIMUM |
| ABRV | KEYWAY DEPTH | 1.317 INCHES NOMINAL |
| AKYN | FURNISHED ITEMS AND QUANTITY | COUPLING,1; COUPLING KEYS,4; PROPELLER KEY,2; PROPELLER NUT,1; COUPLING STUDS,12; COUPLING NUTS,24 |
| APZX | PROTECTIVE COVERING TYPE | RUBBER |
| AZRW | THREAD QUANTITY | 4 PER INCH |
| CPJH | FORWARD END COUPLING DESIGN | DETACHABLE |
| CPNC | FORWARD END TAPER LENGTH | 1.167 FEET NOMINAL |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | 7.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL,MIL-S-23284,COLD ROLLED |
| CPTP | AFTER BEARING SLEEVE LENGTH | 6.250 FEET NOMINAL |
| CPTC | AFTER END DESIGN | TAPERED |
| AARX | INSIDE DIAMETER | 9.000 INCHES NOMINAL |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 17.375 INCHES NOMINAL |
| ABQB | TAPER MAJOR DIAMETER | 16.000 INCHES NOMINAL |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| End Use : 22220 | Marine engines, parts |
|---|---|
| Schedule B : 8409996000 (NAICS 333618) | Parts for compression-ignition internal combustion piston engines (diesel) for marine propulsion |
| SITC : 71392 | Parts, n.E.S., suitable for use solely or principally with compression-ignition internal combustion piston engines |
| CRITL | The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | A |
|---|---|
| Classification Control | U |
| MGMT_CTL | 2sl1bl9 |
| Quantity per pack | 1 |
| Repariability | If condemned or uneconomically repairable, then dispose at intermediate level. |
| Shelf Life | N/A |
| SOS | Nrp |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | M - 85.0 |
| LTL: | M - 85.0 |
| NMFC: | 129930 - Shafts, tail ships propeller shaft |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 810 - Boats, repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
