Buy DIG0203N 4058 Switch Rotary part by Electro Switch Corp

Part Number:  DIG0203N 4058
Manufacturer:  electro switch corp
NIIN:  008041841
Item Name :  switch rotary
CAGE Code:  79692
FSC:  5930 Switches
INC Code:  02134
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for DIG0203N 4058 (described as Switch Rotary), manufactured by Electro Switch Corp with CAGE code 79692. This part is registered under NSN 5930-00-804-1841, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 00-804-1841, NCB code 00 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DIG0203N 4058 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DIG0203N 4058

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part DIG0203N 4058, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DIG0203N 4058 with NSN 5930-00-804-1841, 5930008041841

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-804-1841

Item PartTypeName:

SWITCH,ROTARY

59300080418410P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
221991AA2695

Characteristics Data of NSN 5930-00-804-1841, 5930008041841

MRCCriteriaCharacteristic
AEFPNONTURN DEVICE RADIUS0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM AT 3:00 OCLOCK
AFGAOPERATING TEMP RANGE-40.0 TO 85.0 DEG CELSIUS
AXGYMOUNTING METHODTHREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY3 SINGLE ACTUATOR
CSLCSWITCH ACTUATOR POSITIONING INCREMENT45.0 DEGREES SINGLE ACTUATOR
CSMWDETENT ROTATIONAL TORQUE RANGE1.000 TO 5.000 INCH-POUNDS SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
AAJDTHREAD CLASS2A SINGLE MOUNTING FACILITY
AASATHREAD LENGTH0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM SINGLE MOUNTING FACILITY
ABHPOVERALL LENGTH1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM
ABKWOVERALL HEIGHT0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
ABMKOVERALL WIDTH0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR
ABXFSHAFT LENGTH0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM SINGLE ACTUATOR
AFBHINDIVIDUAL SECTION QUANTITY2
AFDCNONTURN DEVICE TYPETAB AT 3:00 OCLOCK
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP NONSYMMETRICAL
CQJXNOMINAL THREAD SIZE0.375 INCHES SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS110.0 AC AT SEA LEVEL
CQMKCONTACT VOLTAGE RATING IN VOLTS28.0 DC AT SEA LEVEL
CQRQSHAFT FLAT/SLOT ANGULAR LOCATION0.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,SLOTTED SINGLE ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
CTDNSWITCH ACTUATOR STOP DEVICE TYPEFIXED STOP SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
STYLSTYLE DESIGNATORCIRCULAR WAFER,BUSHING MOUNT
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509020 (NAICS 335931) Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q22rbx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top