Buy 71301LH Switch Rotary part by Electro Switch Corp

Part Number:  71301LH
Manufacturer:  electro switch corp
NIIN:  012346436
Item Name :  switch rotary
CAGE Code:  82121
FSC:  5930 Switches
INC Code:  02134
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 71301LH (described as Switch Rotary), manufactured by Electro Switch Corp with CAGE code 82121. This part is registered under NSN 5930-01-234-6436, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-234-6436, NCB code 01 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 71301LH requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 71301LH

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 71301LH, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 71301LH with NSN 5930-01-234-6436, 5930012346436

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-234-6436

Item PartTypeName:

SWITCH,ROTARY

59300123464360P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
63D719037P11523

Characteristics Data of NSN 5930-01-234-6436, 5930012346436

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A 2ND MOUNTING FACILITY
AAJDTHREAD CLASS2B 1ST MOUNTING FACILITY
AASATHREAD LENGTH0.440 INCHES NOMINAL 2ND MOUNTING FACILITY
ABHPOVERALL LENGTH4.820 INCHES NOMINAL
ADAVOVERALL DIAMETER2.810 INCHES NOMINAL
AFBHINDIVIDUAL SECTION QUANTITY1
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS2.203 INCHES NOMINAL 1ST MOUNTING FACILITY
AFDVLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS2.203 INCHES NOMINAL 1ST MOUNTING FACILITY
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
AKPXPOLE QUANTITY1 SINGLE SECTION REAR
AKPYTHROW QUANTITY3 SINGLE SECTION REAR
ALAQMOUNTING FACILITY CIRCLE RADIUS0.905 INCHES NOMINAL 2ND MOUNTING FACILITY
AXGYMOUNTING METHODBRACKET AND THREADED HOLE 1ST MOUNTING FACILITY
AXGYMOUNTING METHODTHREADED STUD 2ND MOUNTING FACILITY
CBBLFEATURES PROVIDEDACTUATOR KNOB AND SPRING RETURN
CMLPTHREAD QUANTITY PER INCH24 1ST MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.190 INCHES 1ST MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.190 INCHES 2ND MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS125.0 AC AT SEA LEVEL
CQQTSWITCH ACTUATOR MOMENTARY POSITIONCLOCKWISE AND COUNTERCLOCKWISE SINGLE ACTUATOR
CQYJMOUNTING FACILITY PATTERNFOUR POSITION CIRCULAR 2ND MOUNTING FACILITY
CQYJMOUNTING FACILITY PATTERNFOUR POSITION RECTANGULAR 1ST MOUNTING FACILITY
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY3 SINGLE ACTUATOR
CSCFTERMINAL TYPESCREW
CSHWCONTACT SWITCHING ACTIONBREAKS BEFORE MAKES SINGLE SECTION REAR
CSLCSWITCH ACTUATOR POSITIONING INCREMENT45.0 DEGREES SINGLE ACTUATOR
CTDNSWITCH ACTUATOR STOP DEVICE TYPEADJUSTABLE STOP SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING15.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
STYLSTYLE DESIGNATORTAP,CIRCULAR,BUSHING MOUNT
THSDTHREAD SERIES DESIGNATORUNC 1ST MOUNTING FACILITY
THSDTHREAD SERIES DESIGNATORUNF 2ND MOUNTING FACILITY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509025 (NAICS 335931) Switches, rotary, rated at over 5 a, for a voltage not exceeding 1, 000 volts
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top