Buy C16331 Transformer Pulse part by Electronic Transformer Corp

Part Number:  C16331
Manufacturer:  electronic transformer corp
NIIN:  013050848
Item Name :  transformer pulse
CAGE Code:  72149
INC Code:  00208
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for C16331 (described as Transformer Pulse), manufactured by Electronic Transformer Corp with CAGE code 72149. This part is registered under NSN 5950-01-305-0848, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-305-0848, NCB code 01 (origin: USA), and INC 00208. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your C16331 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for C16331

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part C16331, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number C16331 with NSN 5950-01-305-0848, 5950013050848

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-305-0848

Item PartTypeName:

TRANSFORMER,PULSE

59500130508480P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
10192525

Characteristics Data of NSN 5950-01-305-0848, 5950013050848

MRCCriteriaCharacteristic
ACYWIMPEDANCE RATING IN OHMS8.0 MINIMUM SINGLE COMPONENT SINGLE PRIMARY
ACZDTRANSFORMER WINDING CONNECTION TYPESCOTT
ADATBODY WIDTH0.730 INCHES MINIMUM AND 0.790 INCHES MAXIMUM
AEHZMAXIMUM OPERATING TEMP130.0 DEG CELSIUS
BPLCWINDING FUNCTION AND QUANTITY1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT
CRGSDC RESISTANCE RATING IN OHMS25.000 SINGLE COMPONENT SINGLE PRIMARY
CWJSWINDING OPERATING VOLTAGE6.00 AC VOLTS NOMINAL SINGLE COMPONENT 1ST SECONDARY
AARGRELIABILITY INDICATORNOT ESTABLISHED
ACZBFREQUENCY RATING400.0 HERTZ NOMINAL SINGLE COMPONENT
ADAUBODY HEIGHT0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
CWJSWINDING OPERATING VOLTAGE11.80 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY
CWJSWINDING OPERATING VOLTAGE6.00 AC VOLTS NOMINAL SINGLE COMPONENT 2ND SECONDARY
TESTTEST DATA DOCUMENT26512-GT825MA2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
TTQYTERMINAL TYPE AND QUANTITY7 PIN
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT
ACYWIMPEDANCE RATING IN OHMS25.0 MAXIMUM SINGLE COMPONENT ALL SECONDARY
ADAQBODY LENGTH1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
AKNAINCLOSURE TYPEFULLY INCLOSED
AXGYMOUNTING METHODTERMINAL SINGLE GROUP
CRGSDC RESISTANCE RATING IN OHMS15.000 SINGLE COMPONENT ALL SECONDARY

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top