Buy E30-20 Motor Alternating C part by Enersys Corporation

Part Number:  E30-20
Alternate P/N:  E3020
Manufacturer:  enersys corporation
NIIN:  011033126
Item Name :  motor alternating c
CAGE Code:  28398
INC Code:  00530
Country:  USA
NCB Code:  01

We've received your request for E30-20 (described as Motor Alternating C), manufactured by Enersys Corporation with CAGE code 28398. This part is registered under NSN 6105-01-103-3126, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-103-3126, NCB code 01 (origin: USA), and INC 00530. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your E30-20 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for E30-20

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part E30-20, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number E30-20 with NSN 6105-01-103-3126, 6105011033126

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6105-01-103-3126

Item PartTypeName:

MOTOR,ALTERNATING CURRENT

61050110331260N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
13216E6451-2C27

Characteristics Data of NSN 6105-01-103-3126, 6105011033126

MRCCriteriaCharacteristic
AAJTOVERALL HEIGHT5.380 INCHES
AAJUOVERALL LENGTH11.330 INCHES
AAJVOVERALL WIDTH5.380 INCHES
ABRRKEYWAY WIDTH0.125 INCHES NOMINAL IDENTICAL ENDS
ABRVKEYWAY DEPTH0.062 INCHES NOMINAL IDENTICAL ENDS
ABWVSHAFT DIAMETER0.625 INCHES NOMINAL IDENTICAL ENDS
AFYSKEYWAY LENGTH0.860 INCHES NOMINAL SECOND END
AFYSKEYWAY LENGTH2.500 INCHES NOMINAL FIRST END
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
AKPSDUTY CYCLECONTINUOUS
ANPZENCLOSURE FEATUREDRIPPROOF PROTECTED-15 DEG
ANTNSPECIFIC USEAIR CONDITIONER
AXCPWINDING TYPESYNCHRONOUS
AXGYMOUNTING METHODEND BELL
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
BFMFCOOLING METHODAMBIENT AIR
BKPBCURRENT RATING METHODLOAD
BKPQINCLOSURE SPECIFICATIONCOMMERCIAL
CBBLFEATURES PROVIDEDTHERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
CNXSPOWER RATING1.440 HORSEPOWER OUTPUT
CWCSLENGTH OF SHAFT FROM HOUSING1.500 INCHES SECOND END
CWCSLENGTH OF SHAFT FROM HOUSING3.250 INCHES FIRST END
CWFXROTOR SPEED RATING IN RPM3750.0 SINGLE FULL LOAD
CWGLCURRENT RATING IN AMPS4.000 SINGLE INPUT
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS208.0 LINE TO NEUTRAL SINGLE INPUT
CWHZSHAFT END CHARACTERISTICA9 SINGLE STYLE IDENTICAL ENDS
FAAZPHASETHREE INPUT
FREQFREQUENCY IN HERTZ400.0 INPUT
TTQYTERMINAL TYPE AND QUANTITY3 WIRE LEAD

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8501524000 (NAICS 335312) Ac motors, multi-phase, exceeding 750 w but not exceeding 14.92 kw
SITC : 71631 Electric motors of an output exceeding 37.5 w (including universal ac/dc motors), ac

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL J2100x-
Quantity per pack 1
Repariability If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 062120 - Generators/motors/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 593 - Motors and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top