Buy 751-6610 FCD Resistor Variable W part by Fairchild Semiconductor Corp

Part Number:  751-6610 FCD
Alternate P/N:  7516610FCD
NIIN:  001106493
Item Name :  resistor variable w
CAGE Code:  15237
INC Code:  37408
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 751-6610 FCD (described as Resistor Variable W), manufactured by Fairchild Semiconductor Corp with CAGE code 15237. This part is registered under NSN 5905-00-110-6493, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-110-6493, NCB code 00 (origin: USA), and INC 37408. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 751-6610 FCD requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 751-6610 FCD

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 751-6610 FCD, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 751-6610 FCD with NSN 5905-00-110-6493, 5905001106493

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-110-6493

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050011064930NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
751-6610/FCD295

Characteristics Data of NSN 5905-00-110-6493, 5905001106493

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.75000 INCHES NOMINAL
AAVMPILOT LENGTH0.06200 INCHES NOMINAL
ABHPOVERALL LENGTH1.550 INCHES MAXIMUM
ABJTTERMINAL LENGTH0.375 INCHES NOMINAL
ABPAUNDERCUT DIAMETER0.750 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.05700 INCHES MINIMUM
ABPMBODY DIAMETER0.875 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
ABXFSHAFT LENGTH0.250 INCHES NOMINAL
ADAQBODY LENGTH1.250 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.200 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER0.87500 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.06200 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE0.50 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
AEFYSHAFT END PLAY0.005 INCHES
AEFZSHAFT RUNOUT0.001 INCHES
AEGALATERAL RUNOUT0.001 INCHES
AEGBPILOT DIAMETER RUNOUT0.001 INCHES
AEGCSHAFT RADIAL PLAY0.001 INCHES
AEGDMECHANICAL BACKLASH IN DEG ANGULAR ROTATION2.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS ALL SECTIONS
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-2.00 TO 2.00 ALL SECTIONS
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0/-200.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.25 FREE AIR ALL SECTIONS
CRGMFUNCTION CONFORMITY PER SECTIONALL SECTIONS ZERO BASED LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS EQUATION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER125.0 ALL SECTIONS
FEATSPECIAL FEATURESSECOND SHAFT RD SLOTTED 0.050 IN. MAX LG
TTQYTERMINAL TYPE AND QUANTITY6 SOLDER STUD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top