We've received your request for W-G-656 (described as Buffing And Polishi), manufactured by Federal Specifications with CAGE code 81348. This part is registered under NSN 3419-00-141-8610, classified in FSG 34 Metalworking Machinery / FSC 3419 Miscellaneous Machine Tools. Our verification process will confirm traceability through supporting identifiers including NIIN 00-141-8610, NCB code 00 (origin: USA), and INC 13748. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your W-G-656 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BMYR | SPINDLE SPEED IN RPM | ANY ACCEPTABLE |
| ELEC | VOLTAGE IN VOLTS | 115.0 |
| FAAZ | PHASE | SINGLE |
| ACDC | CURRENT TYPE | AC |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 8 SIZE AND 4 TYPE |
| AKYN | FURNISHED ITEMS AND QUANTITY | 2 WHEELS,BUFFING |
| BMYP | SPINDLE END TYPE | DOUBLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| FEAT | SPECIAL FEATURES | RADIO INTERFERENCE FREE,ONE END OF SHAFT FITTED W/3/8 IN.CAPACITY 3 J AW DRILL CHUCK AND OTHER END W/UNBLEA CHED MUSLIN BUFF,6 IN. DIA AND 1/2 IN . DIA ARBOR HOLE |
| NMBR | QUANTITY | 1 |
| ATJK | POWER SOURCE | ELECTRIC MOTOR |
| ANCY | HORSEPOWER RATING | 0.750 |
| BQLY | DISTANCE FROM SPINDLE CENTER TO MOUNTING | ANY ACCEPTABLE |
| SR-1 | MANUFACTURERS CODE | 81348 |
| BQMC | DISTANCE BETWEEN INSIDE WHEEL FLANGES ON SPINDLE | ANY ACCEPTABLE |
| AHDR | SPINDLE LENGTH | ANY ACCEPTABLE |
| BQXC | SPINDLE DIAMETER BETWEEN FLANGES | 0.500 INCHES NOMINAL |
| BCNX | MOUNTING TYPE FOR WHICH DESIGNED | BENCH |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | W-G-656 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AKYN,FEAT |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8460900060 (NAICS 333517) | Machine tools for finishing metal by removing metal using grinding stones, abrasives or polishing products, nesoi, n/c, valued $2, 500 & over each, new |
| SITC : 73169 | Machine tools for deburring, polishing or otherwise finishing metal, sintered carbides or cernets by grinding stones, abrasives, etc., n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | ------- |
| Quantity per pack | 1 |
| Repariability | If condemned or uneconomically repairable , then dispose at direct support (ds) level. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | J - 100.0 |
| NMFC: | 131670 - Tools pwr o/t pwr hnd tools sub2 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
