Buy 104-1284-006 Motor Hydraulic part by Fluid Power Inc

Part Number: 104-1284-006

Alternate P/N: 1041284006

Manufacturer: fluid power inc

NSN: 4320-01-446-6247

NIIN: 014466247

Item Name : motor hydraulic

CAGE Code: 7N269

FSC: 4320 Power And Hand Pumps

INC Code: 06128

Country: USA

NCB Code: 01

FSG: 43 Pumps and Compressors

We've received your request for 104-1284-006 (described as Motor Hydraulic), manufactured by Fluid Power Inc with CAGE code 7N269. This part is registered under NSN 4320-01-446-6247, classified in FSG 43 Pumps and Compressors / FSC 4320 Power And Hand Pumps. Our verification process will confirm traceability through supporting identifiers including NIIN 01-446-6247, NCB code 01 (origin: USA), and INC 06128. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 104-1284-006 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 104-1284-006

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 104-1284-006, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 4320-01-446-6247, 4320014466247

MRC	Criteria	Characteristic
MRC	Decoded Requirement	Clear Text Reply
AAUJ	Spline Major Diameter	1.000 INCHES NOMINAL
AKCT	Shaft Rotation Direction	CLOCKWISE AND COUNTERCLOCKWISE
FEAT	Special Features	2000 SERIES HYDRAULIC MOTOR; OUTPUT SHAFT HAS 6B SPLINE PER SAE J499; 0.500 AND 0.625 DIA MANIFOLD PORTS WITH 0.4375-20 UNF-2B CASE DRAIN O-RING PORT SIZE - 4, ACCEPTS FITTINGS FOR SAE J1926 AND 3 X 0.375-16 UNC-2B PORT BLOCK
AWLS	Connection Type	OUTLET
AJAB	Drive Shaft Type	SPLINED, INVOLUTE EXTERNAL AND THREADED
ABUJ	Thread Size	0.4375-20
AGVN	Shaft Thread Size	0.250-20
AWLS	Connection Type	DRAIN
AWLS	Connection Type	INLET
AAJF	Thread Direction	RIGHT-HAND
ABTB	Mounting Hole Diameter	0.535 INCHES NOMINAL
AKAF	Shaft Thread Direction	RIGHT-HAND
AJYP	Screw Thread Series Designator	UNF
AFFL	Mounting Bolt Circle Diameter	4.190 INCHES NOMINAL
AGAV	End Item Identification	NAVY WEAPONS CODE KA, USNS STALWART CLASS TAGOS
AAXX	Mounting Type	FLANGE
APJC	Thread Location	INTERNAL
AEQC	Operating Speed At Rated Capacity In Rpm	908
ASMM	Connection Quantity	1 AND 1 AND 1
AXFH	Spline Length	0.896 INCHES NOMINAL
AXFP	Displacement Type	CONSTANT
AXFC	Connection Design	FLANGED AND FLANGED AND THREADED
AXFQ	Constant Displacement Per Revolution	4.920 CUBIC INCHES
ABTJ	Mounting Hole Quantity	2

Schedule B & Trade

End Use : 21100	Industrial engines
Schedule B : 8412298075 (NAICS 333996)	Hydraulic power engines and motors, nesoi
SITC : 71893	Power generating engines and motors, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	125820 - Motors/pumps hydraulic rotary/pistn
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	594 - Pumps and parts, (machinery and parts),(less than 35 feet)