Buy 100824MM Bushing Sleeve part by Gates Rubber Co The

Part Number: 100824MM

Manufacturer: gates rubber co the

NSN: 5365-01-647-0643

NIIN: 016470643

Item Name : bushing sleeve

CAGE Code: 79563

FSC: 5365 Bushings Rings Shims and Spacers

INC Code: 13206

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 100824MM (described as Bushing Sleeve), manufactured by Gates Rubber Co The with CAGE code 79563. This part is registered under NSN 5365-01-647-0643, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-647-0643, NCB code 01 (origin: USA), and INC 13206. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 100824MM requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 100824MM

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 100824MM, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 100824MM with NSN 5365-01-647-0643, 5365016470643

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5365-01-647-0643 Item PartTypeName: BUSHING,SLEEVE	5365	016470643		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
100824MM	5	2	3

Characteristics Data of NSN 5365-01-647-0643, 5365016470643

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.875 INCHES NOMINAL
ADAS	BODY INSIDE DIAMETER	0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
BZLX	CORNER SHAPE	CHAMFERED OUTSIDE LEFT CORNER
MATT	MATERIAL	STEEL OVERALL
STYL	STYLE DESIGNATOR	SPLIT, PLAIN, NO OUTSIDE FLANGES
FEAT	SPECIAL FEATURES	BOLT CIRCLE IS 1.328, 2 HALF HOLES LOCATED 180 DEGREES APART ARE NOT THREADED, 1 HALF HOLE LOCATED ON SAME BOLD CIRCLE HALF WAY BETWEEN THE OTHER HOLES THIS HOLE IS THREADED. BOLT HOLES DO NOT GO FULL LENGTH. INSIDE HAS A FULL LENGTH KEY WAY. INSIDE DIA IS TAPERED
ADAR	BODY OUTSIDE DIAMETER	1.328 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	TAPER-LOCK BUSHING

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.