Buy BTM18-L Brush Electrical Co part by General Dynamics Global Imaging

Part Number: BTM18-L

Alternate P/N: BTM18L

Manufacturer: general dynamics global imaging

NSN: 5977-01-595-2227

NIIN: 015952227

Item Name : brush electrical co

CAGE Code: 1HT10

FSC: 5977 Electrical Contact Brushes and Electrodes

INC Code: 00302

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for BTM18-L (described as Brush Electrical Co), manufactured by General Dynamics Global Imaging with CAGE code 1HT10. This part is registered under NSN 5977-01-595-2227, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5977 Electrical Contact Brushes and Electrodes. Our verification process will confirm traceability through supporting identifiers including NIIN 01-595-2227, NCB code 01 (origin: USA), and INC 00302. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your BTM18-L requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BTM18-L

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part BTM18-L, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number BTM18-L with NSN 5977-01-595-2227, 5977015952227

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5977-01-595-2227 Item PartTypeName: BRUSH,ELECTRICAL CONTACT	5977	015952227		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
BTM18-L	5	2	3

Characteristics Data of NSN 5977-01-595-2227, 5977015952227

MRC	Criteria	Characteristic
FEAT	SPECIAL FEATURES	PEAK TORQUE:20 OZ/IN;POWER AT TP:60WATTS;MOTOR CONSTANT:2.59 OZ/IN;CONSTINUOUS TORQUE:6.0 OZ/IN;POWER AT CONSTINUOUS TORQUE:8.5 WATTS;INPUT VOLTS AT CONSTINUOUS TORQUE:8.5 VOLTS;ELECTRICAL TIME CONSTANT:0.77 MILLI-SECOND;MECHANICAL TIME CONSTANT:25 MILLI-SEC;DAMPING FACTOR:0.048 OZ/IN/RAD/SEC;ROTOR INERTIA:0.0012 OZ/IN/SEC;ANGULAR EXCURSION:+,- 50 DEGREES;TOTAL BREAKAWAY TORQUE:0.60 OZ/IN;MAX ALLOWABLE WDG TEMP:155.0C;NUMBER POLES:2;WEIGHT:5.6 OZ;WINDING CONSTANTS:RESISTANCE:6.5 +,-12.5 PERCENT OHMS;VOLTAGE AT TP:19.7 VOLTS NOMINAL;CURRENT AT TP:3.03 AMPS NOMINAL;TORQUE SENSITIVITY:6.60 OZ/IN/AMP,+,-10 PERCENT;BACK E.M.F. 0.047 VOLTS/RAD/SEC,+,-10 PERCENT;INDUCTANCE:5.0 MILLIHENRIES,+,- 30 PERCENT.
AAUB	HOLE DIAMETER	0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
AGWM	LARGEST OUTSIDE DIAMETER	0.942 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BTM18-L BRUSHLESS DC MOTORS
ADGZ	DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE	0.8593 INCHES MINIMUM AND 0.8595 INCHES MAXIMUM
AGEK	SPRING FREE LENGTH	1.717 INCHES MINIMUM AND 1.719 INCHES MAXIMUM
CRPH	OUTER EDGE TO SLOT EDGE DISTANCE	0.041 INCHES NOMINAL
STYL	STYLE DESIGNATOR	ONE PIECE
AAQL	BODY STYLE	CYLINDRICAL

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8545200000 (NAICS 335991)	Carbon or graphite brushes of a kind used for electrical purposes
SITC : 77886	Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other carbon articles, with or without metal, used for electric purposes

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.