We've received your request for 1829796 (described as Resolver Electrical), manufactured by General Dynamics Global Imaging with CAGE code 10112. This part is registered under NSN 5990-00-765-1264, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-765-1264, NCB code 00 (origin: USA), and INC 22966. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 1829796 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-765-1264 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 007651264 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1126276 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVH | SHOULDER DIAMETER | 1.3120 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.8050 INCHES MAXIMUM |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 32.0 MAXIMUM |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 575.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 57.00 NOMINAL |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.2 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.700 OUTPUT TO INPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 0.707 INPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.884 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -1.0 TO 1.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -2.0 TO 2.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0004 INCHES |
| AJWH | SHAFT END PLAY | 0.0015 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9300 INCHES MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVL | PILOT DIAMETER | 0.8750 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 30.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSP | STATOR INPUT CURRENT RATING | 57.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 270.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 81.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 15.00 NOMINAL |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.2 TO 0.2 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.60 INCH-OUNCES MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION E AND CONNECTION R2 POSITION F AND CONNECTION R3 POSITION C AND CONNECTION S1 POSITION B AND CONNECTION S2 POSITION C AND CONNECTION S3 POSITION A |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CSJY | TRANSFORMATION RATIO | 0.450 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
| End Use : 21610 | Medicinal equipment |
|---|---|
| Schedule B : 9018903000 (NAICS 339112) | Anesthetic instruments and appliances and parts and accessories |
| SITC : 87229 | Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062120 - Generators/motors/parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 593 - Motors and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
