Buy 4002T67P02 Washer Key part by General Electric Company

Part Number: 4002T67P02

Manufacturer: general electric company

NSN: 5310-00-946-5467

NIIN: 009465467

Item Name : washer key

CAGE Code: 99207

FSC: 5310 Nuts and Washers

INC Code: 01869

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 4002T67P02 (described as Washer Key), manufactured by General Electric Company with CAGE code 99207. This part is registered under NSN 5310-00-946-5467, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-946-5467, NCB code 00 (origin: USA), and INC 01869. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4002T67P02 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4002T67P02

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 4002T67P02, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4002T67P02 with NSN 5310-00-946-5467, 5310009465467

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-946-5467 Item PartTypeName: WASHER,KEY	5310	009465467	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4002T67P02	2	2	5

Characteristics Data of NSN 5310-00-946-5467, 5310009465467

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	1.000 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	1.250 INCHES MINIMUM AND 1.270 INCHES MAXIMUM
ABLC	EXTERNAL STRAIGHT KEY WIDTH	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
ABLJ	INTERNAL STRAIGHT KEY WIDTH	0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
ABLQ	DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY	0.425 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
ABLX	OVERALL DISTANCE INCLUDING KEYS	1.400 INCHES MINIMUM AND 1.420 INCHES MAXIMUM
ABMQ	EXTERNAL KEY QUANTITY	3
ABMR	INTERNAL KEY QUANTITY	2
ABPX	MATERIAL THICKNESS	0.054 INCHES MAXIMUM
CQFM	HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM
CSYM	SURFACE FINISH	63.0 MICROINCHES ALL SURFACES
FEAT	SPECIAL FEATURES	WASHER BENT TO AN OVERALL HEIGHT OF 0.076IN. MIN,0.104 IN. MAX
HEAT	HEAT TREATMENT	NORMALIZED AND TEMPERED
MATT	MATERIAL	STEEL COMP 4130 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PHOSPHATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	16-TE5 CLASS 1 FSCM 99207 MFR REF SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	KEY
TEST	TEST DATA DOCUMENT	99207-3-TE2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING GE

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7318220000 (NAICS 332722)	Washers other than lock washers, iron or steel
SITC : 69422	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, not threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	U - 50.0
NMFC:	194160 - Washer or gaskets, iron or steel,
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware