Buy P2535 Truck Multistop Del part by General Motors Corp

Part Number: P2535

Manufacturer: general motors corp

NSN: 2320-00-926-0887

NIIN: 009260887

Item Name : truck multistop del

CAGE Code: 7X677

FSC: 2320 Trucks and Truck Tractors Wheeled

INC Code: 14657

Country: USA

NCB Code: 00

FSG: 23 Ground Effect Vehicles Motor Vehicles Trailers and Cycles

We've received your request for P2535 (described as Truck Multistop Del), manufactured by General Motors Corp with CAGE code 7X677. This part is registered under NSN 2320-00-926-0887, classified in FSG 23 Ground Effect Vehicles Motor Vehicles Trailers and Cycles / FSC 2320 Trucks and Truck Tractors Wheeled. Our verification process will confirm traceability through supporting identifiers including NIIN 00-926-0887, NCB code 00 (origin: USA), and INC 14657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your P2535 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for P2535

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part P2535, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number P2535 with NSN 2320-00-926-0887, 2320009260887

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
2320-00-926-0887 Item PartTypeName: TRUCK,MULTISTOP DELIVERY	2320	009260887		Y
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MILT45338	1	1	4

Characteristics Data of NSN 2320-00-926-0887, 2320009260887

MRC	Criteria	Characteristic
AAXZ	CYLINDER QUANTITY	6
AEXR	BATTERY QUANTITY	1
AGDH	WHEEL QUANTITY	4
AGDJ	DRIVE WHEEL QUANTITY	2
ALKK	ENGINE BRAKE HORSEPOWER	155.0
ALKL	ENGINE HORSEPOWER RATING SPEED IN RPM	4200.0
ANLJ	BATTERY VOLTAGE RATING IN VOLTS	12.0
ATSY	WINDOW QUANTITY	2
AXJD	TRANSMISSION TYPE	MANUAL
AXJH	FORWARD SPEED QUANTITY	4
BTLY	SEATING CAPACITY	1
BYJF	SEAT TYPE	FOLDING
CNTJ	RATED LOAD CAPACITY	1.00 TONS
CNTK	DRIVE AXLE LOCATION	REAR
CNTL	AXLE DRIVE TYPE	CONVENTIONAL
CNTM	AXLE SPEED QUANTITY	1
CNTQ	REAR WHEEL MOUNTING TYPE	SINGLE
CNTR	NOMINAL WHEELBASE	125.00 INCHES
CNTS	FRONT WHEEL TREAD NOMINAL WIDTH	65.50 INCHES
CNTT	REAR WHEEL TREAD NOMINAL WIDTH	62.50 INCHES
CNYW	BRAKE ACTUATION METHOD	HYDRAULIC AND VACUUM
CNZP	CARGO AREA NOMINAL LENGTH	122.00 INCHES
CNZQ	CARGO AREA NOMINAL WIDTH	77.50 INCHES
CNZR	CARGO AREA NOMINAL HEIGHT	72.00 INCHES
CNZS	CARGO DOOR LOCATION	REAR FACING
CPBG	OPERATOR CONTROL DESIGN	SITTING
CPBH	SEAT REMOVABILITY	NONREMOVABLE
CPJP	ENGINE INCLOSURE TYPE	VEHICLE BODY
FTLD	FUNCTIONAL DESCRIPTION	BASE MAINTENANCE
ZZZT	NONDEFINITIVE SPEC/STD DATA	9 TYPE AND D CLASS
ZZZX	DEPARTURE FROM CITED DESIGNATOR	AS MODIFIED BY MANUAL TRANSMISSION
ZZZY	REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY NAMED AND MODEL YEAR 1966

Schedule B & Trade

End Use : 30100	Trucks, buses and special purpose vehicles
Schedule B : 8705900000 (NAICS 336120)	Special purpose vehicles, nesoi
SITC : 78229	Special purpose motor vehicles, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	Y - Indicates information is in the hazardous materials information resource system (hmirs).
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	C
Classification Control	U
MGMT_CTL	--v---n
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Flz
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.
LCL:	F - 150.0
LTL:	F - 150.0
NMFC:	190190 - Vehicle mtr: auto frt noi tractors
SHC:	D - Moderate sensitivity, category iii, aa&e, unclassified
TCC:	R - Flammable liquids, un class 3 (flammable liquids label)
WCC:	891 - Vehicles, designed for materials handling in and around airfields, terminals and depots; including trucks, tractors, trailers, a